• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by fatecaptured

  1. fatecaptured

    Hemi Orange 72 Rallye Charger

    Well I have Covid-19. Got it from work. Here's what happened prior to the covid. After I pulled out the engine and trans, I completely dismantled the 440. It was not good. I new it was full of sludge, but way worse than I expected. Once I got it apart I was starting to realize that I was...
  2. fatecaptured

    1970 coronet glove box removal

    I figured it out. The flap is supposed to be on the top. So I pulled the staples and put it on the top.
  3. fatecaptured

    1970 coronet glove box removal

    Whats with this flap on the back? Is that for Rallye dashes? I have a standard dash. I don't see how the flap can stay on with installing the cardboard box. Am I missing something?
  4. fatecaptured

    61 Dodge Dart fuse panel location?

    Does anyone know where to locate the fuse panel on a 61 Dart?
  5. fatecaptured

    What are the best tail lights Looks

    1972 Rallye Taillights
  6. fatecaptured

    Pot Metal Stud Repair

    Muggy weld
  7. fatecaptured

    WTB 1972 Cruise Control Servo Bracket

    I currently have the wiring harness, the turn signal stalk, the cable clamp, and the bracket that bolts to the master. I believe all I need is the servo, throttle cable, speedometer cables, and servo bracket. I believe there is another bracket that bolts to the intake that I need as well.
  8. fatecaptured

    WTB 1972 Cruise Control Servo Bracket

    I'm looking for a Servo Bracket for my 72 Charger Cruise control. Also interested in any other parts associated with the Cruise Control system. Thank you.
  9. fatecaptured

    Hemi Orange 72 Rallye Charger

    Well the suspension upgrade has snowballed out of control. I made a cart for the driveline and removed it last weekend. The cart cost me around $50 to make. I used HSS 1 1/4" tubing that I got from work. Along with the plate. Worked just fine. I was a little nervous lifting the body up 5 feet...
  10. fatecaptured

    1972 B Body electric deck lid release switch?

    Thought I would offer up what I ended up doing. I clipped off the bullet connector that ran to the trunk latch and put the proper spade connector. I ended up mounting the switch inside the glove box. It works great! And I did concur that this is in fact a factory trunk release correct for 72...
  11. fatecaptured

    Preferred Finish on LCA’s?

    I got some quasmolie from Resto Rick . Haven't used it yet.
  12. fatecaptured

    Who has used TopCat Whiskers? bonus if 71-74

    I used a window seal kit from Classic Industries. They worked out pretty well. Idk the manufacturer, but made in the USA was on the box.
  13. fatecaptured

    Hemi Orange 72 Rallye Charger

    Well I tore the front suspension apart. Got some parts on order. Also placed an order with Resto-Rick for some quasmolie paint. The driver's side was pretty bad. Definitely was not driveable. The strut rod was missing the spacer between the bushings and was bent. The shock was bent and all...
  14. fatecaptured

    Factory front sway bar bushings?

    Thanks for the help. I have a set of Energy Suspension black 7/8 on order.
Back
Top