• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Gary Gaz

  1. G

    Oil Pump Prime Procedure

    My engine builder does it all by hand and no drill. I tried once and in about 8 turns you could feel the pressure and see the oil. had the valve covers off
  2. G

    Front Tires Rubbing Advice

    I have 15x7 with 4" BS on steel wheels and run 245/60R15's no rubbing at all on my satellite.
  3. G

    4 Post Lift Installation Recommendations

    How tall is your roof?
  4. G

    Fuel pump?

    Hi. Public Service Announcement. I had a filter like that and some of the glue that holds the filter to the top of the housing the outlet side came loose and stuck the needle open in the seat and caused petrol flooding of the engine bay. seems over time either the heat or the fuel itself...
  5. G

    FOUND What Is This Called? Hook on underside of '69 Charger bucket seat.

    Similar to Valiant ones maybe ? , there is one the same on bench seats also, freight form US would kill anything small
  6. G

    295/65/15 Fitment

    15x8 Mopar Cop steel wheel with 4.5"BS . about inch spare either side.
  7. G

    Rear Lap belt Anchor Bolts

    One of local Auto Interior trimmer. supplies all this stuff as well, seat belts, spacers, bolts. found this out yesterday.
  8. G

    Rear Lap belt Anchor Bolts

    @Christian B, I live in New New Zealand. you will find its a standard bolt. especially in older cars
  9. G

    Rear Lap belt Anchor Bolts

    Go to your local auto dismantler. they will have them out of older cars,
  10. G

    B body bench seat install

    I better try and get better measurements then, For the moment I'll blame the other person on the end of the tape lol
  11. G

    Tach installation

    I had similar issues, seems the repo ones are affected easily by magnetic force, mine would sit about 3500 with key off, I have an after market set of speakers . I saw somewhere that someone placed a tin shield over the unit, this did drop the needle down a bit. Also read about adding a...
  12. G

    B body bench seat install

    Hi, I know this an very old thread, But which holes on the outer mounting brackets do you end up using.? As there are 2 sets and inner and outer hole, I know they aren't far apart but am struggling to find this information as well, eg both outer holes or outer on one side and inner on the other...
  13. G

    Need timing help

    Out of interest, have you checked the Vaccunm can actulaay holds vaccunm , recently had a fircore one fail, was doing a tune up and was a slight miss at crusing speed, can had failed.
  14. G

    Lifter tick on fresh build

    Which side is the 'Tick' on?. Remember the drivers side gets oil first then the passengers side.
  15. G

    Bench seat and Floor Auto shifter

    Not yet, we have a lot of compliance to do here first off, so gotta get all the ducks inline first. Plus it's the original front bench for the car too
Back
Top