Search results for query: *

My engine builder does it all by hand and no drill. I tried once and in about 8 turns you could feel the pressure and see the oil. had the valve covers off

I have 15x7 with 4" BS on steel wheels and run 245/60R15's no rubbing at all on my satellite.

How tall is your roof?

Hi. Public Service Announcement. I had a filter like that and some of the glue that holds the filter to the top of the housing the outlet side came loose and stuck the needle open in the seat and caused petrol flooding of the engine bay. seems over time either the heat or the fuel itself...

Similar to Valiant ones maybe ? , there is one the same on bench seats also, freight form US would kill anything small

15x8 Mopar Cop steel wheel with 4.5"BS . about inch spare either side.

One of local Auto Interior trimmer. supplies all this stuff as well, seat belts, spacers, bolts. found this out yesterday.

@Christian B, I live in New New Zealand. you will find its a standard bolt. especially in older cars

Go to your local auto dismantler. they will have them out of older cars,

I better try and get better measurements then, For the moment I'll blame the other person on the end of the tape lol

I had similar issues, seems the repo ones are affected easily by magnetic force, mine would sit about 3500 with key off, I have an after market set of speakers . I saw somewhere that someone placed a tin shield over the unit, this did drop the needle down a bit. Also read about adding a...

Hi, I know this an very old thread, But which holes on the outer mounting brackets do you end up using.? As there are 2 sets and inner and outer hole, I know they aren't far apart but am struggling to find this information as well, eg both outer holes or outer on one side and inner on the other...

Out of interest, have you checked the Vaccunm can actulaay holds vaccunm , recently had a fircore one fail, was doing a tune up and was a slight miss at crusing speed, can had failed.

Which side is the 'Tick' on?. Remember the drivers side gets oil first then the passengers side.

Not yet, we have a lot of compliance to do here first off, so gotta get all the ducks inline first. Plus it's the original front bench for the car too

Yes it looks likes it should work. Just wondering if anyone had actually done it

True could always extend all the linkages I guess, and rise it up a bit more

Updated, thanks , 69 satellite

Has anyone had a bench seat and a factory auto floor shifter fitted? did the shifter clear the seat? 69 satellite. Mine was bench seat to begin with and column change. changed to bucket seats and floor change when replacing most of the metal , thinking to change back. Ideas, would build a custom...

It takes almost 20 mins for the oil to get to its full operating temperature, so need to factor how thin it will be warm, any 30 wt oil should be fine, I use Penrite 20w-60 with zinc in my fresh 440, with high volume pump with std spring and its about 70psi warm, 80 odd cold, according to the gauge.