Recent content by Grandbob

I found one guys thanks for looking

Thanks

If you had a picture it would be nice, but with the bolt flange facing up the longest Bolt at the top away from you the short bolt should be on the left hand side pretty tricky to describe but a picture would be great,that should be the peace for the right hand door passenger door is what I...

Please do, The bolts are centered and line up with the holes in the door frame, I know it would be upside down but with a small cut and bend to match the curve of the door frame on the right side ,it might work?

Please do, it looks like the bolts are centered and lineup to the holes in the door, I know it would be upside down but a cut and small bend on the offset for the curve in the door frame might work.

For a 69 charger , I'm looking for a rightside door ventwindow frame to door bracket 68-70 b body part,I have a pic of the left side

Hey guys Does anyone know where I can buy a set of crazy 8 lifts and engine dolly ,or a set of plans build my own

Looks good, thanks

Evening friends I'm getting back on my basket case 69 charger getting things together for the quarter window trim pad . Anything wrong with pop riveting the inside whisker/sweep to the trim pad ? I have a set of sweeps that came with the OE style staples and another set came with very...

I look into it

Thanks , they look good Affordable 2

Heavy poly ✔️ Rope caulk ✔️ Probably is the route I'll take. I for sure want to tuck the material back in the relief opening at the bottom of the door. I've seen the TV builders use Dina matt, looks like that could trap water in some areas of the door frame

Hi guys I started looking at yearone & classic Industries for the plastic liners that protects the back of the door panels 68-70 charger, but didn't see them ,I may not be putting in the right name, I did see a set on eBay but seems too pricey at $100+. If you know where I should look please...

Thanks for the info