• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Greg_1963

  1. Greg_1963

    WTB 62 or 63 Seat Hinge Cover

    I have a set of the original chrome covers (both sides) from a 63 Polara four door donor car if you are interested.
  2. Greg_1963

    What we have been dealing with.. Lake Fire, anyone else?

    Here is a site with up to date information for all large fires throughout the country. http://inciweb.nwcg.gov/incident/4302/ . A little late now but if you have not looked at Firewise it has excellent information for preparing your property to better survive a fire. It is shaping up to be a...
  3. Greg_1963

    Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"

    One owner, always garaged, only driven on Sundays! Rough is an understatement but is available complete (I would like to keep the grille). $800 located in Shelton, WA. The 20 minutes from I-5 is if you are driving the Bainbridge car home.
  4. Greg_1963

    Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"

    I can measure on my cars but fairly sure the 4 door is shorter. I have a set of 2 door panels if you would like but they will be cores for refurbishing. I am about 20 minutes out of your way if you are driving South on I-5. I can send some pics on Thursday when I get home from shift if you...
  5. Greg_1963

    Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"

    Not mine but looks to be in excellent condition! http://seattle.craigslist.org/kit/cto/5010311608.html
  6. Greg_1963

    1963 Dodge basket case

    The more I do the more rust I find. What I thought were solid floors have rust holes in the RF pan. Also found some holes coming through the cowl after removing the windshield. Pulled the cowl off today and will be fabing some patch panels on the lower cowl and sectioning part of the cowl...
  7. Greg_1963

    My 63 DODGE !

    Looks better than my parts car!!! Good luck with your build!!!
  8. Greg_1963

    $500- 68 charger

    Thanks for the additional information. I have not spent a lot of time under the car yet but planned on using the frame rust killer. I will have to do some research on the VHT products for the bottom of the car. I am planning on painting the engine bay and trunk body color, Just not sure what...
  9. Greg_1963

    $500- 68 charger

    Just spent some time looking through your thread. A couple of things one awesome job so far! Secondly your willingness to go deeper into a project than you thought possibly makes me confident I will be successful completing my car as it should be instead of taking shortcuts. One question that...
  10. Greg_1963

    Spring relocation on 63 dodges

    I was alone in the shop tonight so could not get center to center. From outside to outside was 39.25 inches (99.69 cm) and the springs were 2.5 inches wide (6.35 cm).
  11. Greg_1963

    Spring relocation on 63 dodges

    I am not certain which brand of relocation kit this is but here is a pic of my 63. The tire is 31x14. I can get some measurements if that would help you.
  12. Greg_1963

    WTB Poly 318 Engine

    Does your "travel some" include WA state? I have one in a 63 Dodge I don't intend on using but only about 2500 miles away.
  13. Greg_1963

    decal removal on organosol hood

    I have had good success using the 3m stripe off wheels. Used them on multiple paint surfaces and haven't had any paint issues. I have not tried it on organosal paint however.
  14. Greg_1963

    Is Bigfoot Real

  15. Greg_1963

    Old Guy Coronet 500

    Welcome aboard! You will probably have better luck posting in the want to buy section of the forum for the parts you need.
Back
Top