Recent content by Gregg DeGeorge

  1. Gregg DeGeorge

    69 Roadrunner 4spd conversion

    It is it looked just like an e body 833,has the two shifter locations,Friend of mine thinks van or pickup ,it’s in great shape already over budget,turned down that bearing retainer will give it a try tonight ,thanks for the help thanks hopefully get tranny mounted tonight ,maybe tomorrow...
  2. Gregg DeGeorge

    69 Roadrunner 4spd conversion

    Your probably right thought I did good anyway to tell what I bought ;Brewers for small bearing retainer ?..
  3. Gregg DeGeorge

    69 Roadrunner 4spd conversion

    Can you tell from those numbers if it’s an overdrive hope not ?
  4. Gregg DeGeorge

    FOR SALE 69 11 inch bellhousing

    Hello I’m trying to convert my 69;over to a 4spd my bell housing number is 2892626 running 143 tooth flywheel tried setting up my clutch tonight Tranny won’t go in all the way seems like center hole in bell housing is 1/4 to small what’s your hole measurement? I’m running a 833 70 or newer...
  5. Gregg DeGeorge

    69 Roadrunner 4spd conversion

    Thanks no it’s a steel crank 4spd 69 440:I put a new pilot bearing in seems my front bearing retainer is 1/4 bigger than the hole in bell housing ;thinking there’s a larger front retainer on some trannys ;thought [email protected] would work B or e body ;maybe I need a b body only Tranny 69 or earlier not...
  6. Gregg DeGeorge

    69 Roadrunner 4spd conversion

    Hello all ,working on a new project 69 Roadrunner,swapping it over to a 4spd ,thought all was going well but ,I’m using a bellhousing 2892626,bought a used 833 had two mounting places for shifter so I think it’s a 70 or newer ,couldn’t find a date. On it the front bearing carrier is to big in...
  7. Gregg DeGeorge

    833 for a Roadrunner

    Thanks I’ll give it another try ,my shifter doesn’t pick up reverse,I have tranny on a milk grate ,trying to set it up before I install it ,swapping my 69 Roadrunner over to a 4spd thsnks
  8. Gregg DeGeorge

    833 for a Roadrunner

    Thanks for the pictures just about ready to drop in drivetrain
  9. Gregg DeGeorge

    WTB Flywheel 440

    Hello anyone have a good used flywheel for a 69 440 I’m in Ct 143 tooth thanks Gregg
  10. Gregg DeGeorge

    833 for a Roadrunner

    Looking for a picture of 4spd shifter linkage 69 Roadrunner swapping my car over to a 4spd bought used 833 with used shifter bought dog ears from brewer think the 967 is reverse 891 2/1 and 068 4/3 ,I saw a picture some just can’t seem to find it again thanks Gregg
  11. Gregg DeGeorge

    Door glass vent window install roadrunner

    Hello All trying to get some glass back in my drivers dr ,car is a69 Roadrunner it’s a post car ,I can’t find those plastic guides that snap on glass that slide into vent window Assy Anyone know where to buy them ?Dont see them in the Classic Catolog thanks I have a picture thanks again Gregg...
  12. Gregg DeGeorge

    SOLD 1973 440 engine carb to pan

    Ok it says I have 0 messages hopefully it Works otherwise I’m on face book Gregg DeGeorge from Naugatuck ct which I’m worse at mostly use it for Market place have a great weekend
  13. Gregg DeGeorge

    SOLD Hurst Comp Plus mechanism, rods and levers

    Thanks I’ve been trying to delete conversations with no luck also trying to look at 440 in NJ no clue what I’m doing wrong I go to messages click all of them to trash ,tryed marking them read ,nothing seems to work thanks
  14. Gregg DeGeorge

    SOLD 1973 440 engine carb to pan

    If 440 still for sale send me a phone number and town where it is so I can see how long to get there ,are you around Monday morning early,I’m in Naugatuck thanks
Top