Recent content by hanstaill

Hi! i was curious if you'd sell two out of four? 66 belb. I fourdoor

Yes and so does NAPA, etc but it's the drums, 10x2 that match is impossible to find. used are too far gone and new old stocks...in my opinion too expensive might as well swap it for a common set for the money. i sure wish i don't have to pull the shaft out and crack open the differential!

hi guys! after months of searching, original 10x2 drum and 1x3/4 shoes are non existing on this planet anymore and i've decided to swap to 10x2.5 everything from the drum to backing plate, has anyone swapped the whole assembly before and can give me some tips and tricks for the job? this is...

hi guys! after months of searching, original 10x2 drum and 1x3/4 shoes are non existing on this planet anymore and i've decided to swap to 10x2.5 everything from the drum to backing plate, has anyone swapped the whole assembly before and can give me some tips and tricks for the job? this is...

no good- the guy said he'd never seen one that size and don't have one. he did say he has a drum that's 1.75 somehow, i assume these wont fit, was there a mopar that had 10x1.75 drums?? - - - Updated - - - Rusted i mean not going back on rusted.... and i looked at the one from autozone...

this is great!! the drums on my car were really rusted and i have everything replaced except the drums due to the fact that no body seemed to have them, if you would please- can you measure that what you have (i'm sure it might be the same as mine) and confirm it is 10x2 and contact patch inside...

hi! i've never done a swap to a bigger drum before, completely new.... can you assist me with some information on this? lf not too difficult, this may be necessary for me at this point...

hi!! I'm trying hard to look for a new/used(remachinable) 10 by 2 inch brake drums for the rear of my 66 Belvedere!! i have 1.75 brake shoes new and i can't seem to find the drums that match anywhere.... anyone have a pair for sale please?!!? THank you!!

no luck....this is what Centric said "we don't, never had and never will have them....sorry. i'm devastated.

AHHH SO CLOSE!!! small bolt pattern is 4" correct? and b bodies, belvedere, is 4.5....... SHOOT!! this is driving me crazy....

I'm not looking to upgrade to bigger, i'm wanting to keep it the same size... at least till it is absolute i HAVE to upgrade... i still was not able to fine one....anyone know where i can look for 10x2 drums for the rear of my belvedere?? i might have to buy used and re surface them- please...

i still was not able to fine one....anyone know where i can look for 10x2 drums for the rear of my belvedere?? i might have to buy used and re surface them- please HELP@@!!

from what i can say...it's 10 in drum, bolt spacing is 4.5" and center hub hole is approx/close? to 3 inches- sorry for the last vagueness but it's hard to measure with rust turning to dust everytime i touch it haha

Hi! is this the one you've found on rockauto? BENDIX Part # PDR0174 More Info {#2534750, 2534751, 2534752, 3004730, 3004731, 3549836, 3549837, 3580534} Premium Brake Drum Front; Drum / drum brakes 10" x 1-3/4"

hI, Im not sure what you mean by NEW ++ N.O.S. "B" Body Brake Drums (Obsolete by all "regular channels") and some N.O.S. ++ Asbestos ++ Brake Shoes, are you saying you have a pair for sale of drums and pads?? can you msg me if you do please? THank you