Recent content by jag_mopar

The place is up for sale on FB market place

I have both types of panels for your B Bodies. (see Pictures) Fresh sets are coming from a local fabricator shortly. Send a private message with your questions, The pairs are $1500 plus shipping from Orlando Florida. Thank you FBBO for your service to the Mopar Community.

Have you tried the riviets?

That is what a car dealer would do!!

I found that some aluminum radiators have narrow tubes (champion) that transfer the heat. Some manufacturers offer larger tubes that will provide faster greater flow through. A combination of problems may be occurring. Get a Hiperformance water pump with more blades. Get a high flow thermostat...

I would suggest replacing the steering box with one that is either truly manual or one of the firm feel power designs from one of the forum supported suppliers. You have a few modern choices. Old boxes have too much play. That may be why you took the belt off. Spend some extra money and do the...

66-67 have the round side rear seat light. 68-70 have the square hole. I have both types of fiberglass reproduction panels available. 68-70 parts are interchangeable. you can only get them one place.

Can’t let those go at this time.

i would consider trading a 79 volare 4 dr with 318 83k miles. driver with orig paint cold ac to trade?

I figured it was about that distance. Thanks for digging up the comparisons. These are numbers all of us should strive to achieve. @Kern Dog , if you can get braking to around 100 feet I think you are doing great. When the weather warms up let us know your results. I am curious to find out what...

So the only way I see if it will stop in a reasonable distance is to setup a test in a parking or similar location. Mark 25foot increments and drive at 60 mph and see how far it takes to stop. What is a reasonable stop distance?

the wider the tire, the less prone to skidding, more grip to the road will force the rotor not to lock but come to a quick stop

those door gaps look real nice. How are your rear seat interior panels? I have reproductions available.

I threw my HF flange tool in the back of the drawer because of 2 reasons. 1 obviously the debth of the flange and 2 it seemed to stretch the metal of the flange i was trying to create which warped the metal a little

is that a 70 pink convertible?