• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Jarven1977's latest activity

  • Jarven1977
    Jarven1977 replied to the thread Charger build discussion.
    I'm running 1.12bars, Borgesson, QA1 adjustable UCA's, QA1 adjustable push rods, QA1 steering rods with my own tweak to get rid of bump...
  • Jarven1977
    Jarven1977 replied to the thread The Willomet Charger.
    Pure fabrication **** in this build. Been a while since I checked in but you've made great progress lately. Greetings from Sweden, keep...
  • Jarven1977
    Jarven1977 reacted to 1970RT's post in the thread The Willomet Charger with
    Like
    .
    Bit of a catch up. I thought this door rust repair project would take a weekend plus a weeknight or three. It took a month. The car...
  • Jarven1977
    Jarven1977 reacted to 1970RT's post in the thread The Willomet Charger with
    Like
    .
    Side firewalls are welded and blended, front firewalls are trimmed, fit, and cleco’d, and the flaming river rack delivers 33* of...
  • Jarven1977
    Jarven1977 reacted to 1970RT's post in the thread The Willomet Charger with
    Like
    .
    Firewall fabrication had a slight detour to closing off the front rocker of the unibody, and tying it to the frame. Little tasks like...
  • Jarven1977
    Jarven1977 reacted to 1970RT's post in the thread The Willomet Charger with
    Like
    .
    Just an interesting (to me) piece of detail. Even with the deep engine setback (12.5” overall) this driveshaft is only 4.25” inches...
  • Jarven1977
    Jarven1977 reacted to ckessel's post in the thread The Willomet Charger with
    Like
    .
    I'm like you. Eating that Elephant one bite at a time.
Show older items
Back
Top