Recent content by Jeffj

I would like both 1965 ones if I could get them. I am in British Columbia Canada, zip is V0X 1X1. Let me know if available and shipping; Pay Pal or? Jeff Johnsen

Finally got it cleared out.

It is and I looked at the screen re emptying it out but I find no screen like that in my account so I don't know how to empty it out.

Kim, do you have one of those park cable housing parts for the extension housing of a 727/904? I am missing one for a cable shift 727 I have. The gaskets are the same so I think they interchange. Also cables if you have any for a floor shift?

The whole story is that the 2 ground straps burned off; all other damage is downstream from that as Dave basically says. Glowing ground straps equal auto ignition. Jeff J

The 1964 Dodge housing is wider than other B housings. I have one here that measures 55 3/8 for the bare housing, flange to flange. It uses tapered axles with the wheel mounting hubs located on the tapered end of the axle and use a keyway and key and are held on with a castellated nut with...

That is not Jim Grant's '64 race hemi car at the old Mission track is it? I have some Mopar cars here in Popkum ......just sayin Kiwi..... Jeff

Just a point for your consideration; those windows will crack in the center if you leave them lying down like they are shown. You need to store them resting on the edge, either top or bottom but do not store them flat. I'd hate to see them break; ask me how I know....... Jeff J

In your '66-'74 group top row, the cap shown as "unknown export" were the caps that came on my brother's new '68 Roadrunner delivered here in British Columbia Canada. I always thought that they were the standard poverty caps everywhere for that year but I don't know that for sure. Excellent info...

Camshaft end thrust. Jeff

You should have a record of your payment to them on the date you were there with the amount paid to take to court; charge card, debit card, cheque or till receipt from the counter person for any cash paid. This would prove that you shipped an item at that time as your claim would state. Jeff J

I have a '65 sedan parts car and was going to move the whole vent/front track to my '63 330 sedan because it was better but it was too short in width by about 1/2 inch. I sure thought they would have been the same. I measured from the glass at the bottom to the end of the chrome strip and one...

I think '62 '63 are narrower than '65; not positive which for '64, just a fyi. Jeff

The inner bearing inner diameter is smaller on the drum spindle and some disc conversion kits for that combo add a machined spacer in order to use, for example, an 11.75 Cordoba rotor/hub on a drum brake spindle. I have one of those setups from Scare Bird, they have a different kit now than the...

Speedo cable from trans gear to the back of the speedo? $? Also trans cable shift from the buttons to the transmission? $? Jeff J