• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Jimclo2002

  1. Jimclo2002

    Brake fluid doesn't come out

    All metal brake lines and rubber brake are brand new I ended up replacing both front calipers and the master cylinder. (the first set calipers and master cylinder were new). But I replaced them both. I did bench bleed the master cylinder very well and installed it and two new calipers. When...
  2. Jimclo2002

    Brake fluid doesn't come out

    I'll try the disconnecting the line at the proportion valve and make sure that there are no obstruction Also the second master cylinder was just installed. I bench bleed the master cylinder and exercised close to 30 times to make that there was no air in the master cylinder
  3. Jimclo2002

    Brake fluid doesn't come out

    Installed new calipers installed Installed new master cylinder Try to gravity bleed right caliper. No fluid comes out Then removed right right rubber hose that's between the metal brake line and caliper and installed a clear hose on the metal brake line I try to suck the clear hose trying to...
  4. Jimclo2002

    70 super bee brake problems

    I adjusted in place. The rear wheels turn freely
  5. Jimclo2002

    70 super bee brake problems

    I'm not sure what you're saying regarding the self adjuster screw being wrong . Also which is the correct way of "turning the screw?
  6. Jimclo2002

    70 super bee brake problems

    I did adjust the rear brakes with little drag
  7. Jimclo2002

    70 super bee brake problems

    Yes I replaced the proportion valve
  8. Jimclo2002

    70 super bee brake problems

    Yes I replaced the proportion valve.
  9. Jimclo2002

    70 super bee brake problems

    This is a front drum to disk conversion ALL New brake lines All new brakes pads ALL Rear wheel cylinders New master cylinder New power booster New front calipers Drums are turned Front rotors are new The master cylinder filled to top Pedal feel, pedal does have resistance but still goes to...
  10. Jimclo2002

    70 super bee Brake problem

    Little background ALL New brake lines ALL Rear wheel cylinders New master cylinder New power booster New front calipers The master cylinder filled to top Pedal feel, pedal does have resistance but still goes to the floor? Also, it feels like the brakes are not releasing . Example when I'm...
  11. Jimclo2002

    70 super bee power booster air puff noise when I apply brakes . Any clues why??

    The complete brake system is new. Were you talking about the rubber slinky type tube that is around the rod that would connect to the pedal mechanism? Should I remove rubber tube piece if it's still on back of the brake booster? Or is it a bad booster ? Or the rod is too short? Or To long ???
  12. Jimclo2002

    70 super bee power booster air puff noise when I apply brakes . Any clues why??

    70 super bee power booster, puffs air noise when I apply brakes. When I apply the brakes slowly I do not get the air puff noise . The hole brake system is brand new. Brakes are bled multiple times. Pedal feels OK maybe a slightly low pedal. Fronts are disc/rear drum Any clues on why this may...
  13. Jimclo2002

    WTB Need a Quarter Window Track Bracket W/Roller / guide 70 b body hardtop

    Good morning John I just saw your price on your board underneath the roller $40 much for shipping to What is it? I will go over here huh? And then can't come around 53 Love Creek tractor in a truck not all of itDr., Lewes, DE 19958
Back
Top