Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
stock heads im assuming? the surface of the heads where to gasket sits is a small rounded area, not the best for sealing. mopar should have milled this flat, but that would be too easy! what i did with mine and they havnt leaked since,4yrs or so. when the valve cover is off clean both sides. and...
hey that was a great job lefty! i will see about a you tube account and try to post video. b body handles are a bit simpler seems like the only issue so far is the amount of play in the button itself. seems to work fine so far,just dont like how much it moves around, will see if it rattles when...
got a set of your b body door handles for xmas, just got around to putting them in this weekend. have to say, they look pretty good, and are a economical alternative to re chroming the originals. one issue i noticed, the button on the handle seems very 'jiggly' one a bit more than the other,is...
any pics of underhood and under trunk lid placement of jacking instruction, and underhood antifreeze and thermostat decals, any info would be helpfull!
mine is much like yours! 65 belvy 440 727 auto 3,55 in the rear same size tires that you are running, mostly stock motor, happy zone for the motor is 2200 to 2500 rpm. with the 355's that's about 45 55 mph if I do a lot of highway 3000 rpm is about 62mph according to reading on wifeys smartfone...
ok great info dan! maybe you could trouble shoot for me. 1965 Plymouth belvedere front bumper turn signals. here is the dilemma have the2357na bulbs. one side is much brighter then the other. looks as if one side is using the larger fatter filament as the running light and the other is using the...
I am currently running the factory steel shroud with 4 blade fan and a 3/4 inch spacer. it works well just thought it could be upgraded a bit. will see how the 6blade fixed fan works out will try and post pics after install
thank for the feedback guys! the short hayden unit still seems too tall. was looking thru service manual, seems that the 426w engine came with a 7blade 18and 1/2 fan with a torque style clutch. no spacer. this unit must be flat as a pancake given the clearance that is available. I don't have...
here goes, looking to upgrade cooling fan. 65 belverde originally 273 car. now 440 rb motor. auto trans manual steering factory radiator with steel shroud and 4 blade fixed fan. looking to upgrade to viscous fan to move more air and maybe free up a few ponies. I have 3and 1/8 inch clearance from...
so here is the latest. took full size starter to autozone and xchanged for the duralast 3258. had them bench test my old full size said test was inconclusive. had them test the duralast, came up good. had them re test my old one, now it comes up good! put in duralast $49 unit, fires rite...