LemonWedge's latest activity
-
Metal finished is just basically finished welds. Thats why when the tunnel was welded in, it was welded on both sides to add more... -
I really enjoyed following your build. It’s sad to see something so awesome wounded. I’m gonna follow this time to.
-
LemonWedge replied to the thread Rebuilding LemonWedge..This looks like time well spent. Fighting with the blanket…. Room to move it all rearward. Just more room in general in a real tight...
-
I didn't move anything back 3/8" or have to machine the water pump houing 3/8" to use the front plate. All my accessories mount to the...
-
LemonWedge replied to the thread Rebuilding LemonWedge..You guys both have some serious skills. I wholeheartedly agree that Mikes work is like jewelry. Your work and your car take a back...
-
-
Hmmm like Christine?
-
I sure can relate to Tex’s point of view on setting a goal and building back from that. I think we all start out that way. I did. In...
-
I ran gaskets on the plate on my previous car. After a while they would leak. This car has used Ultra Grey with no gaskets for 13 years...
-
LemonWedge replied to the thread Rebuilding LemonWedge..I did take note of that, 6PK. The mock up on that must have been tedious, unless you put the bars in with the engine already mounted...
-
LemonWedge replied to the thread Rebuilding LemonWedge..This is really helpful, Tex. You and I are of the same mindset regarding ET and all of the extra requirements that go with crossing the...
-
LW , only 1 extra thing I can think of . Havent seen too many do it . If going to a motorplate I would be measuring and checking to use...
-
As you can see from my earlier posted photos of my engine bay. I used the snout bars to make my front plate tubular mounts from with a...
-
LemonWedge replied to the thread Rebuilding LemonWedge..I’m unaware of what tricks the RO23 & WO23, or even the HP2 post cars had up their sleeves. My belief is that Chrysler didn’t do much...
-
LW I was looking through my weight loss notes and the K-frame engine brackets that I cut off were 5Lbs plus 4 Lbs more gone by trimming...
-
I think doing the whole front clip is a great idea, especially since you already have it.
