• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by mike1965

  1. M

    Where can i get a 440 marine oil pan

    I need a 440 RB marine oil pan steel or alum. anyone no where I can get one with out breaking the bank lol Thanks for any help Mike
  2. M

    Torque converter clearance

    Well mine worked out good there was 3/16'' from the conv. lug to the flex plate so no washers needed . Thanks for all the help guy's Mike
  3. M

    Torq. conv. question please help

    yeah they were by the bolt lug so I knocked them off . Thanks for all the help guy's Mike
  4. M

    Torque converter clearance

    You don't want to do that the conv can come out of the pump , it has to be spaced so it's not to tight to the pump and then you add spacers in between the conv and the flex plate.
  5. M

    Torq. conv. question please help

    Good idea , thanks My motor has a steel crank and is internally balanced , I always thought the same as you.
  6. M

    Torque converter clearance

    When I install the converter and trans to the motor how much should I pull the converter back out of the trans towards the motor. Thanks Mike
  7. M

    Torq. conv. question please help

    I have a 3500 stall and it has some weight's tacked on it , now what I need to no is if this conv. is for a cast crank motor and if it is can I remove the weight's for my motor it has a steel crank. Thanks for you help
  8. M

    440 Comp. ratio and piston height

    Thanks Gary for that info that was what I was looking for. Now can you please tell me the stock piston C/H on a 1977-78 motor
  9. M

    440 Comp. ratio and piston height

    Compression Distance (in): 2.061 in.
  10. M

    440 Comp. ratio and piston height

    The pistons I have are the 2350p sealed power , now with the 77-78 block what would I need to do to get 10.5 - 11.0 comp. what head cc and what deck height. How much taller are the 2350p pistons compared to the 1977-78 stock pistons
  11. M

    SOLD "Mini Express" cam

    SOLD Thanks
  12. M

    Where can i buy 505 and 540 badge emblems

    Thanks guy's I will check them out
  13. M

    SOLD BB .528 solid cam

    SOLD to moparjohnny pending payment on the date above , thanks Johnny Mike
  14. M

    Where can i buy 505 and 540 badge emblems

    Where is the best place to buy 505 and 540 exterior emblems I've looked and can't find what I'm looking for. Mike
  15. M

    SOLD BB .528 solid cam

    275.00 shipped
See more
Back
Top