Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Correction...we took the trim off yesterday to look at it and realized that the trim piece is correct but whoever put it back on used generic clips that do not hole the trim in the right place on the hood or at the right angle. Any idea where I can find a set of the 8 clips to attach it to the...
Where can I find a decent driver quality piece? Been trolling ebay and the interwebs but there are no repro....the hood lip trim for the charger is different than the coronet. Anyone have any contacts or suggestions?
Just looking for a decent driver quality piece as I am missing mine. Everything I am reading tells me that the 66 coronet repro piece is different than the charger.
This is a complete set of drums with parts and pads. I did a 4 wheel disc brake conversion and just pulled the entire drum and line off each wheel. They worked and the car stopped fine but cannot vouch if they need new components. I'm located in Greater Atlanta, GA area. I think the whole...
Above and behind the front tires on my 66 charger there is no splash guards in place. I'm not sure what goes in there and if it is plastic, rubber, or steel. If anyone can point me in the correct direction I'd really appreciate it. On my car you can literally look up between the inner and out...
yean my radiator is the same. The plastic tank on my car is dry-rotted and cracked. Don't have an overheating or overfill problem...just want to replace an item under the hood that is broken and non-functional.
My 66 dodge charger has some kind of aftermarket overflow reservoir bolted on under the hood. I have attached a picture. It is rotten and cracked and I'm trying to decide whether to try and replace this one or go another route. Feedback is always appreciated. This can has no part numbers or...