Recent content by Mopar083

It moved the radiator mounting surface back about 1/4" at most. The plates are 14ga. or so.

I bought a 22" to 26" adapter kit from Glen-Ray Radiators in Wausau, WI. It consists of four plates that extend the 22" mount locations and allow a 26" to bolt up with no drilling. Used it on a '70 B body. Not sure if they have something for a '66. It worked out really well.

As R413 mentioned, center and outboards are different. One or both of the vendors below should be able to get you the parts you need. I don't know if they ship overseas. Allstate Carb: Home Page - Allstate Carburetor Chicago Carb: Chicago Carburetor This guy has lots of good Mopar six...

United Auto Trim in Fond du Lac, WI. Interior Upholstery | Fond Du Lac, WI | United Auto Trim

Check voltage drop on the battery cables.

I have the factory Firestones on a 2018 Ram 2500 4WD. They're fine on dry, clean roads but the truck is pretty much disabled in an inch of snow using 4WD. I had Michelin LTX M/S on last Ram and they were the best truck tire I've ever owned. Good for 60k miles. They don't appear to be very...

PM sent.

Inbox is full.

Saw that one last night; hoping to get just the parts I need. I know, wishful thinking. Thanks!

Looking for an ammeter to fit a 1970 rallye dash. It doesn't need to be in working condition- I need the faceplate and the needle for a voltmeter conversion. Oil/fuel/temp gauges are ok too as the face and needle dimensions are similar. Thanks in advance.

I have standard and metric sets of their ratcheting combination wrenches. Very nice quality for the price.

Got mine here: Holley Tri power Fuel Bowl - Allstate Carburetor

Running one of their conversion kits in a boat with a small block Chevy. No problems after 4 years.

I might make it there. Busy weekend and need to prioritize...

Let us know what you find.