• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by moparmarkus

  1. 1968 Dodge Charger moparmarkus

    1968 Dodge Charger moparmarkus - Engine rebuild

    In 2022 I wasn't able to LogIn in FBBO while I rebuild my engine. I'm happy to be back again and hope you are doing well wrenching & driving your Pentastar Supercars. Cheers from Blackforest!
  2. moparmarkus

    Comment by 'moparmarkus' in item '1968 Dodge Charger moparmarkus'

    I put some F70-14 & original Roadwheels on it: https://postimg.cc/rRD968MR
  3. moparmarkus

    Review by '' on item '1968 Dodge Charger moparmarkus'

  4. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    Thanks FBBO!
  5. 1968 Dodge Charger moparmarkus

    1968 Dodge Charger moparmarkus

    215/70R15 Redlines on 15x7JJ 4"BS with dogdish hubcaps History 1998 I knew I want one and thats the reason why... but still a long way to go 2008 I bought mine in the north of Berlin from a german USCar guy after an overnight road trip all across the country arrived in it's new home...
  6. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    ksdbru78 never shipped, turned out to become a scammer after 4 years of membership with 100% ratings, was than immediatly banned by the moderators, however, I was refunded by paypal, gladly I payed not as 'friends & family'... Thanks again to all other members, especially the one who sold the...
  7. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    I found a set, but still waiting on shipping from ksdbru78 Thanks fbbo!
  8. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    No thanks, need the ´68 ones.
  9. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    yes, I would also take chrysler or plymouth ones, all three have equal shapes except the individual company marks. chrysler https://www.ebay.com/itm/67-68-Chrysler-Dog-Dish-Hubcaps-9-Set-of-4-Hub-Cap-1967-1968-Dodge-Plymouth/303116411538? plymouth...
  10. moparmarkus

    FOUND dog dish hub cap poverty 9" inch dodge chrysler plymouth

    I'm looking for '68 dogdishes, single ones, a pair, three or a set in driver or worse condition. After one decade on torque thrusts now I'm going for some redlines on dogdish o.e. wheels. thanks fbbo
  11. moparmarkus

    Carter Thermoquad carb stalls at idle in gears & doesn´t start & let the fuel in carb

    Here is the pic which describes how to solve the stall in idle problem: Thanks again to all TQ experts! :3gears:
  12. moparmarkus

    Carter Thermoquad carb stalls at idle in gears & doesn´t start & let the fuel in carb

    Ah, that may be the reason why acceleration felt a little less then before, after the tune up yesterday. I will correct that to a just slightly open bowl vent in idle and closed position on gas. Thanks again!
  13. moparmarkus

    Carter Thermoquad carb stalls at idle in gears & doesn´t start & let the fuel in carb

    Problem is solved now! Thank you guys a lot for your kind help! Car runs strong again, especially with idle in gears! :headbang: In fact the bowl vent linkage was (incorrectly) bend and kept the bowl vent flap inside the bowl closed in idle. In my theory the rising heat builds up more and more...
  14. moparmarkus

    Carter Thermoquad carb stalls at idle in gears & doesn´t start & let the fuel in carb

    I use the OE gasket on a 74´ spreadbore manifold as shown above. I connected distributor vacuum as shown in the carter manual, but will check again. Thanks a lot for your help so far. I´m really happy to found some TQ experts! :sSig_thankyou: 1st Block the internal bowl vent "door" in an...
  15. moparmarkus

    Carter Thermoquad carb stalls at idle in gears & doesn´t start & let the fuel in carb

    Just my backbone is acing a bit, everything else is fine, thank you. :icon_mrgreen: The pic was taken after first installation and the silver tape was removed prior starting first time, so the big port on the pass side is free.
See more
Back
Top