Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Purchased here and never used $250 sipped $200 local pickup
(from ad I purchased from)
Edelbrock CH4B aluminum intake for RB (413/426/440) wedge engines. Good shape. The CH4B is no longer produced, but is sought after because it was basically an updated, aluminum version of the factory cast...
Here is a vid of the exhaust
http://www.govbt.com/pics/VID_20181015_192311.mp4
Engine has pcv valve installed and had a rebuild in the 90's around 20k miles ago
It does not have idle issues until it's been driven for awhile . It tends to lose rpm slowly at a stoplight light if that makes sense. If I put it in neutral it will usually pick back up.
One thing I did learn from this is that if your arm is on the positive battery post and you touch the engine you are in for a surprise :eek:
Engine seems to run fine except for the blow by
http://pics.govbt.com/pics/VID_20181011_154242.mp4
I just remembered I have the tester for gasses in the...
I had a hard time getting the compression tester screwed in while the engine was cold. If i did it while the engine was warm I would probably need asbestos skin :D
I appreciate the suggestions and advice so far. I don't have a leak down gauge, I will see if I can get one at the autopart store
cyl 1 60psi
cyl 2 90psi
basically all the others were 145-150
this is a 440 btw, guess its time to start weighing my options
Anyone know a good engine builder for complete engines :P
Here is what I have now. Being new and all I was wondering if someone can help me with what parts I need to order to make this correct.
I appreciate the help