Nxcoupe's latest activity
-
I remove the strap from beneath the steering column and let it drop down. Much easier to get the cluster in and out -
Nxcoupe replied to the thread 66 Coronet 500 Driver, Light Resto.I got the radio out and moved the hvac controls out of the way. I looked at the speaker and it didn't look good, so out came the top of...
-
-
Nxcoupe replied to the thread 66 Coronet 500 Driver, Light Resto.The radio hasn't worked since I got it. I was pretty disappointed as it was redone by antique radio. It is AM/FM with either amp output...
-
-
Nxcoupe replied to the thread 66 Coronet 500 Driver, Light Resto.Looking at the printed circuit board, I followed the different circuits around and figured out which were ground, which was for trun...
-
-
Nxcoupe replied to the thread 66 Coronet 500 Driver, Light Resto.I put a rag on the column to keep it from getting scratched or scratching the bezel. Once I got it out, I flipped it over and checked...
-
-
Yesterday I took her out to her very first car show. It was about an hour and a half drive from my house. This was the show. Although...
-
Took the car out to a local cruze night. I parked next to my buddies 69 Dart ragtop. It was a good night with no issues to report.
-
Nxcoupe replied to the thread Any plumbers in here?.Thanks guys! That was it. I had a friend who is experienced at doing this without damaging the tub insert, replace the antique faucet...
-
Nxcoupe replied to the thread NXCoupe's Shop Build.Neil came up with this sketchy but functional way to get the last sheet of drywall up in that corner. It worked and it's up there. I...
-
-
Nxcoupe replied to the thread NXCoupe's Shop Build.I had to go out of town last week for work, so I didn't get anything done at all through the week. We hit it hard Sunday as Neil and...
-
-
in theory........ when I screw it all back together, it'll fit exactly like I had it :drama: I need to prep and install that pile of...
-
I always see labels that say not to use thinner as a cleaner, I assume the same for acetone......... I always clean with a wax/grease...
-
........the weldable primer I use is very watery, and anti rust I brush it in the rails, it runs under all the little support brackets...
-
officially on the rebound! ........Pigpen has left the building :mad:
-
where else can you go and get hourly updates?
