• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by OldFireGuy

  1. OldFireGuy

    Glove box door removal and install

    After fighting mine (and failing) for an hour, I checked here and found my answer. It's so simple. Thanks a million for the pictures. I kept telling myself it had to be something easy for the assembly folks back in the day. Again, thanks.
  2. OldFireGuy

    SOLD 1965 Dodge Dart 170 Wagon, Tucson, AZ

    What the price for the entire package?
  3. OldFireGuy

    360 roller cam engine question.

    I don't have the LA heads, but I did locate some core Magnum heads to test fit. First question is if the LA and Magnums head gaskets interchange?
  4. OldFireGuy

    360 roller cam engine question.

    I acquired a fresh 360 short block from a friend. Casting # 53006921, 89-92 truck. It has the roller cam and timing chain installed with the roller lifters, nothing else. My question is: will the later 93 up Magnum heads work? I have a complete core 360 from an 95 Jeep for the heads/rockers and...
  5. OldFireGuy

    Comment by 'OldFireGuy' in item 'My '49 DeSoto S-13'

    As Spring has arrived, I will be installing front disc brakes from Scarebird, new firewall mounted dual power brake master cylinder and hanging pedal, also replacing the stock steering column with a Flaming River tilt column. The goal is to make it Hot August nights in Reno this year.
  6. OldFireGuy

    Comment by 'OldFireGuy' in item 'Mopars I wish I still had.'

    The 56 Plymouth had a flathead 6 and 3 on the tree. The 64 Valiant a slant 6 with 2 one bbl carbs and 4-speed with pistol grip. I put a 413 4-speed into the 67 Coronet, also with a pistol grip shifter. The 62 Imperial was all stock.
  7. Mopars I wish I still had.

    Mopars I wish I still had.

    56 Plymouth, 64 Valiant, 67 Coronet and 62 Imperial. The Kit Car was fun too.
  8. OldFireGuy

    '65 Plymouth on Ebay ***Not Mine

    Not mine, but looks pretty good and complete. Located in Vallejo, CA. $2,550 is the buy price. https://www.ebay.com/itm/1965-Plymouth-Other/273751359488?hash=item3fbcda4000:g:jQQAAOSwgrZcQ9~P
  9. OldFireGuy

    FOR SALE B-body Mostly Door Parts

    Is the door latch from the driver door?
  10. OldFireGuy

    Original front disc brakes?

    I went ahead and purchased pair of these ($260) they seem to be of decent quality. These fit either side, just need to move the bleeder. I welded on 5/16th bolts for the brake hose bracket rather than drill and tap. The hose bracket would have to be clearanced if bolted on 'flush', so the...
  11. My '49 DeSoto S-13

    My '49 DeSoto S-13

    I bought this car a few years ago, the guy I got it from over-stated the quality of work. The flathead 6 had been replaced with a 318/904 but retained the stock (low geared) rear end. The engine install was sloppy and mounted in the frame crooked. The wiring was hap hazard and part homemade and...
  12. OldFireGuy

    Original front disc brakes?

    Has anyone used these from Classic Industries? https://www.classicindustries.com/product/1969/plymouth/roadrunner/parts/mn8100.html
  13. OldFireGuy

    Original front disc brakes?

    I found this on EBAY: https://www.ebay.com/itm/Buick-1967-69-Bendix-4-Piston-Caliper-Repair-Kit/361771509989?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
  14. OldFireGuy

    Original front disc brakes?

    Anyone have the Centric part number for the Bendix 4 piston seal kit?
  15. OldFireGuy

    Original front disc brakes?

See more
Back
Top