Recent content by rcrx

Hi, appreciate you sharing the link. I don't know what the actually blade retention spring looks like (critical). Couple other questions I'll fire off to ebay seller. I did modify my classic industries wiper blades with a cutting wheel (wasnt pretty) and actually got them installed but I'm...

Removed clips and tried installing on classic industries suggested replacement buy no go. Have spent countless hours searching. Frustrating AF. Currently no wiper blades (has arms but no refill blades) on my convertible.

Hi, is it still avail? If so, can you test it with a AA battery? Should come up to approx 2k rev line. Thanks, lloyd

Great suggestion, I'll check it out today and give feedback. thanks

Classic Industries 16' refils fit width and length but the metal clips that hold them in are incorrect for my arms. close but no cigar!

I got a set of 16' from Classic Industries but the metal clip that holds them into the wiper arm is incorrect. I called and talked with them for an hour but no resolution Been looking for refills for about 6 hours or more of internet searches. If you find anything, please post where. I'll do...

Hey Guy's, I have a 66 coronet and trying to find refills. Classic industries sold me 16" refills but clips were incorrect. Internet calls out Anco 19-16 but not sure. Any help is much appreciated.

New to this site. I have a 66 coronet convertible, 426 Max Wedge, 4 speed, posi. Straight and clean. Runs/looks good.

Hey Big Bill, from my research, I need a set or 3 of Anco 19-16 wiper blade refills. Classic Industries sold me a set that wasn't correct. Would much appreciate it if you could hook me up or point me in the right direction. Thanks Rcrx