Recent content by RDC5

Thanks for the info. my car is a cruiser so I think the overdrive will work well with my 3.91 gear. Anyone know why it is stamped R833?

I am collecting parts to convert my 74 big block Charger to a 4-speed. I found a complete 4 speed od transmission with low miles, but the id stamp is instead of A 833 is stamped R or maybe P 833 4 22 85. Anyone know what this tranny is? the other numbers are 03B2335 and C-13546 B. Thank you for...

Excellent Thank You. I will order a set

I have brought home a complete 77 Charger Daytona. Frame is solid and body is fixable but the floors are gone from spending many years sitting outside under a maple tree. It seems that no replacement panels are available for these cars so I was wondering if anyone have tried to fit the AMD 73-74...

Thank for the replies, I just ordered a 30 amp relay. Already have a regulator and gauge to install as well

I am installing a Carter electric pump on my car, what kind of relay should I install? The ones I've seen are for 30 or 40 amp draw pumps and the info on this pump says it draws 4.5 amps, what relay should I use? Its a 8 psi pump. Thanks

My 74 Rallye coupe. I think it was as base a Charger as you could get in 74, car was ordered in Ontario with no options at all. I've added a few options myself over the years

no they aren't giving them away, but I think it would look great in my car

Has anyone bought one of there after market clusters? Kind of looks like a new Challenger dash design...I'm thinking of upgrading my dash with one. Auto Meter 7030 American Muscle Gauge Kit (6pc.) | Tdot Performance | Tdot Performance

Looking for a AM or AM/FM radio for my 74 Charger. Thanks

Smoking a cigarette while working on the fuel system? Shocked that there wasn't a little voice in his head telling him that isn't a smart idea...

Hi all.. I found someone with a steel 440 crank that has this casting number. Can anyone tell me what its out of? I'm looking for a correct crank for my 71 v-code 440. Thanks

The motor has just under 190000 kms, I drove it 60 miles back home and it didn't smoke when first started cold and ran great, no noises from the engine and what surprised me a bit was the motor is dry, no leaks anywhere. I read the cams in these engines is very small so I will upgrade that for sure

Thanks to everyone for the replies. I'm going to read up and seriously look into doing this swap. Cracking between the valves? is that common on the magnum heads?

Thanks for the replies, the magnum came from a 2wd Dakota, and I took everything including all wiring and ecm. Didn't think too much about swapping the whole driveline, just thought the Magnum heads might flow better then the smogger 360 heads. The 318 with fuel injection would make the car a...