Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi All. I have a 68 Bee. I want to allow fresh air into the engine. I am looking to cut the blacked out parts on the Hockey Stick hood ornaments and some of the hood material under the hockey stick. I am looking to use the center section of the N96 setup in order to get a seal to the oval air...
Do you guys recommend standard or heavy duty springs? Its a 68 SuperBee 383. I want it to be a comfortable ride. I am adding the 1inch lift. Normal cruising around town and highway. Not drag racing or towing.
ESPO quoted me a new set with an added leaf (+1inch lift from stock) for about $300 (+shipping), dont have to swap the front hangers. A local shop also quoted 300 to add a leaf to my existing springs. Sounds like a new set is the better choice.
Hi All. Happy New Year. Looking to raise the rear end on my 68 SuperBee, 383 car. Will the SS leaf springs fit in or do I need to swap out the front mounts? I was told the SS springs are shorter and require the front mounts to be replaced. I am pricing$$ out adding a leaf VS. new SS springs...
Hi yall. I'm getting ready to apply the Superbee stripe to my 68 Bee. I have not been able to find any good documents as to where the stripe is placed exactly. Can someone please provide measurements to this drawing for the tailpanel bee. Also need some measurements for the quarter panel Bee...
Found this in a different post.
Mopar Chassis Color Chart
Legend:
BC: Body Color
GB: Gloss Black
SB: Semi-gloss Black
CI: Cast Iron Gray
N: Natural Steel or Aluminum
MP: Manganese Phosphate
CC: Color Code
(*): Some Mopar core supports are body color with semi-gloss black sprayed
on the...
Hi All. I'm restoring a 68 SuperBee. Getting ready to paint the drive shaft except I am not sure what color it was from the factory. It also has an 8.75 rear end. What color was the axle and pumpkin drop-out? Thanks.
Hi all. I am having trouble finding a formed upper radiator hose for my 68 Coronet. 383/4speed. Napa has 2 options and neither fit. Did 68 have a formed hose or did they use a flex hose for the upper? I found a formed hose for the lower. Thanks.