Recent content by rlowe

Which pushrods are these?

'68 to 70 something all used the same part numbers, and there were at least 4 different castings during those years, right?

Agreed...But didn't 68-up also?

Having built many 440 HP engines, I'm currently starting a restoration rebuild on a 1967 440 HP. I'm going to use the stock 915 heads, and am finding that valves, pushrods, and spring part numbers are different for 66 and 67 years than '68-up. Can anyone tell me why...Are the lengths different...

I am finally going to put the white body side stripes on my FC7 GTX. Does anyone have the factory drawings showing location measurements or can tell me exactly how they go...Also can anyone clear up what the V6W stripe looks like...and the difference between it and V7W...THANKS

Does anyone know the correct diameter and setback for the waterpump and crank pulleys for a 71 440-6BBL motor...HELP...

Does anyone know where I could get my cassette player gone though? How about a service manual for it?...Thanks

I've decided to use painted roadwheels on my GTX. Here's the question: Should they be painted black or body color?

By the tag..Thanks for the info...

Please refer to the picture I posted of my car..I'm trying to figure out if this is correct, and if it is, where I can find it...Thanks

This is what my 71 looked like before restoration..I can not find what the V6 stripe was supposed to look like, or if this is a correct stripe...Randy

71 Plymouth B Body Roadrunner, GTX, or Satelite

Can anyone give me info where I can find the correct body stripe that was used in the V6W option in 1971. Been looking for years and always come to a dead end...HELP...Thanks

I just wonder, since the supplier leaves extra material, where the end of the carpet should be on the firewall to be correct.

Can anyone tell me how far to extend the carpet up the firewall to be as close to factory as possible. Thanks...