Recent content by road chicken

Come to think of it I haven't seen my 12' Lufkin or my 25 ft milwaukee in a while. Which one wound up with you? When I go out to my storage locker I'll get pictures of the front foam and the headliner as well. I think later years used padding along the side as well. My 71 did not have it installed.

The whole reason Anikin went to the dark side, and threw the force out of balance was because of Padme'. So the whole galaxy almost got flushed down the crapper for a piece of tail.

Didn't see it. I quit watching after E2 and found out the whole damn thing went down because of a piece of A$$. Skinny bucktoothed chicken legged no less. Now Young Selma Hayak, you got a reasonable argument. But nooooo.

Taking a good look at RA III's picture I realized there are at least 3 different cassette bodies used. The one pictured, the assembly I sent to SDWeatherman , and the power unit I have from a 71 SSP, are all different. Minor but distinct. RA III.. Is the headliner on yours using the bows...

How much for the pair? PS your inbox is full

That's what suspected. Please comment back on how they seal. I was under the impression they had to have a specific finish on the head and the block for them to seal properly.

I have that same 72 sunroof bulletin floating around in the library somewhere. From memory.. It shows the front drain tubes exiting the kick panel about 2/3rds of the way down, with @ 2" of tube outside and sealed with seam sealer. The rear tube exits in the front of the wheelwell @ 10-12...

Your head gasket bore diameter can effect the ratio as well. They aren't all equal. What composite gasket did you find in .027?

Agree. 71 didn't have them. However, it doesn't mean you can't add them. I grabbed a set from similar year charger and made them work. Had to make " Custom" bend on the passenger side to clear the base plate.

Personally I think it's a sales thing. I have used Mobile 1 on all my builds, including break in and never had a problem. All flat tappets, and broken in with ...get this... Lithium grease. Say what you will but I have done 6 engines like this and never wiped a lobe or lifter. I have a cam or...

It's all good until some kid gets their head stuck in it . Although the cameras seeing around the trailers and hitch are good. I'm glad they took our semi stuff and incorporated it. Now Mopar should get that tech too.

Under dash look for a red triple socket..it's flat and has three sockets. That is hot all the time. The yellow triple is hot for acc and on, the orange is for dash lights.

Now I could see that. FF10- Death race taking out commie rot sheet subverting the country. 10 pts for Antifa up to 1000 pts for Pelosi, Hitlery or 5000 for Soros. Yeah that would work .

Is it the same as the roll down 1/4 window just bolted in place?