RussY's latest activity
-
RRussY reacted to j-c-c-62's post in the thread "Secret Photos" of the 68 Petty Road Runner at the Daytona 500 with .I attended that race. Not sure if I arrived morning of the race or for a support race the day before. As a spectator in the infield, it...
-
RRussY replied to the thread Lunati Hemi cams advice.That’s crossed my mind but I think there is a little room for improvement over the stocker. Long duration and relatively low lift. I...
-
RBULLET CAMS 8785 Old Craft Rd Olive Branch, MS 38654 662-893-5670 Grind Number CRH 280/287-12FC Part Number 300000 SN T31156 CHRYSLER...
-
RRussY replied to the thread Lunati Hemi cams advice.I called a couple of months ago and he said that the cam blanks or core were unavailable. Nice conversation although I would guess I am...
-
RRussY replied to the thread Lunati Hemi cams advice.GTXRT Thanks, I will. Mr. Lindley was that two different cams, or the same cam with a split duration in two different engines
-
RRussY replied to the thread Getting stuck in 2nd gear shifting to 3rd.I waited for nearly a year to get mine, have same problem. I think it is a shifter mechanism issue as I had no issue before the change...
-
RRussY replied to the thread Lunati Hemi cams advice.Have made several inquiries about that, seems that there are no cam cores to grind for FT cams.
-
RRussY replied to the thread Lunati Hemi cams advice.I have had and have 440 cars and I agree they feel a lot stronger. I would love to put the Tremec TKX with the deep first gear in it...
-
RI have a similar grind in one of my 440's as you have for your Hemi. It does not male much for vacuum. I just mounted a vacuum canister...
-
RRussY replied to the thread Lunati Hemi cams advice.I wondered about that, quite a few HEMI cams I’ve looked at do that as well. Maybe designed for stock exhaust? Rocker arm ratio...
-
RRussY replied to the thread Lunati Hemi cams advice.Thanks for taking the time to respond Rick, love your videos! Do you think the Hydraulic #1 is a good choice and would perform well, or...
-
RI have two new Lunati Hemi cams for a basically stock 426 +.040 engine in a 4000#, four speed, 3.54 Dana car, no intention of going past...
-
-
RI will post some pics ,front and back. When I got the car was blsck , but you can see the yellow where the screws where and when u fit...
-
RUse the KISS principle, check all of the small things mentioned first, including any possible interference of the shift rods at the...
-
RRemove the shift rod for 3-4. See if the shifter still has the same feel, if it does then the problem is in the shifter. If not see if...
