Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've got a 75 Doba with the springs about ready to come thru the trunk. I know of a 77 Sport Fury with solid rails, trunk floor. How much of it should transplant?
Throttle kick solenoids and similar external gadgets come right off. As noted, the main fail of the ELB carb is no vac signal for the distributor. It's actually pretty easy to drill a hole in the throttle plate and add the pre elb fitting.
There's a few different varieties of smog air horns and...
IIRC: 3 or 4 screws to the plate under the trunk, another 3 or 4 into the back lip of the quarter and at least one in to the bottom of the tail light housing. Comes down pretty straight but gotta screw screw it somewhere.
This guy is chasing blown gauges, wiring issues but great shots of pull the dash apart. Kinda like an E body or truck but different.
https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2924013/1976-charger-speedometer-and-gauge-issues.html#Post2924013
Finally had a conversation with the current owner - it is in fact the Russo / Steel car minus the continental kit and Kelsey Hayes. Yes, he actually managed to score a complete NOS stripe kit.
In other news: Wendel's just changed hands again. Going to a guy that knows absolutely nothing about them.
Some things I've noticed with mine that have absolutely nothing to do with your symptoms.
1. throw a mounted tire on it, spin it, get weights to add. spin it again, still asking for same amount.
2. add weights, spin it, wants more, ask it again, still wants the same.
3. add weight the 2nd...
As far as I can tell the service routine is either swap the balance head or swap the circuit board. Some machines have knobs to trim the sensors but these don't. Book says to fine balance a wheel before calibration, dunno what skipping that will do to it. Hope not to find out.
Since yours is...
So I pulled the wasted linings out, went back to the truck shop, talked to guy that did it. He had no clue how it could have come part. Other guy had the balls to charge me for redoing it but whatever. Put about 20-30 miles on it since, been acting fine.
Original B-body intermediate cable w/...