Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey thanks guys. So if i understand correctly i just need to make a jumper wire between the black and yell-tr wires? With that being done parking lights should come on with headlights, and no problems with my turn signals correct?
Is that something that is regulated in the headlight switch? If so, could I replace with a latter model seeing that my needs replacing do to the dimmer switch?
Hey guys, when my headlights are on should my parking lights be on also? Because mine aren't. They come on when the light switch is pulled halfway out like they're supposed to. The turn signals work fine also. I just thought they were to come on with the headlights.
Thanks.
Looks great. Did you plumb into the factory defrost vents in the top of the dash, or did you use the supplied ones? How far does the unit hang down? It's hard to tell did you mount it above the transmission hump? I'm in the same perdicament with my 66satellite. My A/C is long gone, and nothing's...
Looks great. Did you plumb into the factory defrost vents in the top of the dash, or did you use the supplied ones? How far does the unit hang down? It's hard to tell did you mount it above the transmission hump? I'm in the same perdicament with my 66satellite. My A/C is long gone, and nothing's...
Thanks for the responses guys. I went with the fel-pro vs50145r because my local parts store had them in stock. For $17.00 I thought I would give them a shot. They had good reviews. I did notice they are very stiff. Hope they work.
Hey guys looking at replacing my valve cover gaskets on mt 383. I have cast M/T valve covers on stock cast heads. From what I see the base of the valve covers look just like the base on the cast Mopar performance valve covers. Just wondering if the moroso #93055 gaskets will work with those...
Thanks guys for the help. The body shop is using a satin black with satin clear. Another question I have is when washing and waxing the car, what do you guys use on satin paint for protection. I think that waxing it would make it glossy. Thanks
hey guys what black did Chrysler use on the hoods of their factory muscle cars? I have a 66 satellite that I'm having a scoop put on and I want it black. Just want the correct black. Thanks.
Guess what, the damnedest thing happened it's all back together. My buddy and I had the center section on the bench and with the axles, and with a Little jockeying around they slid in. So back under the car we went to dry fit again. Every thing went back together without a hitch. We pulled it...
Dave, now that I look at it I don't think I'm getting to the second set of splines. If that makes sense. I took the 498 in to a reputable speed shop and had new gears and bearings put in, I'm waundering if I should have sent the axles with. So now what do I do.