Recent content by siroadrnr

are you using AMD quarters?....if so, I had to trim 1/8" off just behind the door opening to get a good fit, also, I see its a console car, can you show a pic of the routing of the console harness, please?...good luck with the project!!

a suggestion, keep the quarter pieces where the road runner emblems bolt through, its alot easier to duplicate them this way, than measuring....

Keep me in the loop if you come up with a solution. I did upgrade to a Holley EFI, and includes electric fuel pump, naturally, but no other power accessories or high powered audio. BTW, it is also a 451!!.....Sorry to hear of a forum member's passing.....

Ok, following very closely, and I'm still confused. I want to prevent any electrical failures on my 70 Roadrunner, which Ive owned since 1996. I still dont see a method to accomplish this. For reference, this car is a Superstorm Sandy survivor, and has had the dash cluster, harness, column...

I'm seeing only 2 nipples....3 would be too weird for me...

Hey..interested..I'm in Staten island...

Hey, I'd like to reach you to order a headlight harness, but your box is full, plus i have a question about "ammeter delete"...email siroadrnr@aol.com

confirmed!! Its in!!...very much appreciated!!

I believe so!!....I'll run out and see how it works out, thanks so very much for the help!!

Even after taking a dozen or so pictures of my clutch pedal setup before powdercoating and rebuild, I cant seem to figure where this bracket belongs. My project (70 Roadrunner) is taking way too long to progress, and I'm anxious to reinstall he dash and windshield, but this is holding me up. Can...

Believe it or not, I cant find definitive answers to the correct bulbs used in the Rally dash, the bayonet style used in signal indicators, etc. Next, what brands are produced domestically??:thankyou:

That actually looks very good, I may pick some up and test it myself. Thanks for sharing!!

Ernies, I updated my reply with the information you inquired about...

Yes, Ernies, its still available, it had the 11" drum brakes, no snubber, and the yoke is 3 5/8" with a 1 1/4" cap

well, to use the 12 inch rims, I widened the inner wheelhouses 3 inches each, but if you dont want to go that route, you may use a smaller rim and tire. Yes, open being 1 wheel spins,..this was to primarily use the car on the street, and with that wide a tire, turns are easier. If you have a...