Recent content by Wcotner96

Well, just an update got it figured out, my uncle for some reason ran a wire from the brake switch to the dimmer switch,, not sure why but pulled it out and got rid of it and lights work perfectly. Thanks everyone

Hey, so right rear signals work, right rear hazards work, I unplugged the tail light harness and it does the same thing. So issue may be in the dash I imagine just not sure where to start

Been working on my 70 RR and cleaned up the dash and got new bulbs in everywhere, headlight switch is new and all lights come on as supposed to, Brake lights do not work when lights on/pedal pressed Lights off/pedal pushed all park lights turn on Gotta be a wire crossed possibly or bad...

Like the trunk floor or of the trunk rail from below?

For sure, I figured it may require some fab work. Just wanted to see what people’s opinion were. Thanks

Yea I planned to maybe patch it the best I can.

Yes 1970 RR, you’re a life saver! Thank you!!

Ok that’s good. Any chance you know what they are called. Do they make replacements of them?

This is the where the trunk seal would be. What is the correct way to fix these spots. The quarter panel is solid minus these areas. The bottom of rear window is also solid. Is the trunk rail area part of the new quarters? I don’t want to replace the entire quarters as they are 99% good.

Oh for sure, I can do the pulling lol I just didn’t want to haha. But that is probably the best option. It’s a project so that’ll just make it more fun. Thanks

I want the motor to spin. But was trying to figure out if I can fix it before pulling the motor and or trans

Unfortunately the converter bolts are all clear of the block. Maybe the flex plate bolts to the crank are the issue or it’s the trans.

That’s what I’m gonna look for today. That’s the exact situation it seems. Thanks buddy.