• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by yella71

  1. Y

    Shop in bay area or beyond for 4 speed conversion

    Im very familiar with that job but im in sw fla. sooooo good luck
  2. Y

    TTI Exhaust experience

    love my TTI
  3. Y

    Vintage Kendig Carburetor

    Do it. let us all know how it works. nothing like first hand experience
  4. Y

    SOLD 1968 TRW power steering pumps

    Thanks I had Saginaw on the brain
  5. Y

    SOLD 1968 TRW power steering pumps

    are these the pumps that have a oval neck?
  6. Y

    Did I buy the wrong master cylinder?

    The line does not seal on the threads of the line nut. it seals on the tube flair. If your tube nut screws in then check your tube flair or look in the master to see if the seat is damaged or missing. Also check your tube flair itself , as it may be damaged.
  7. Y

    What happened to my power brakes?

    do you have vacuum to the booster ? If so maybe the leaking master killed the booster.
  8. Y

    The Meme not a Meme Thread Part DEUX

    agree one hundred precent
  9. Y

    Do these look like 70 B body seats?

    the hoops are gone on the locking piece on the bottom of the seat
  10. Y

    2 out of 8 plugs fouled rich.

    your doing more harm than good starting it and running it for just a few minutes . it needs to come up to operating temp and run that way for a while. if your not going to drive it just leave it.
  11. Y

    What is this part for? is in a 2300 middle carb of a six barrel setup

    it is a fuel slosh baffle. not super critical but it keeps the fuel from sloshing out the vent
Back
Top