69 beep beep
New Member
I'm Looking for full quarters for a '67 GTX, any advice? Thanks
1966-1967 Plymouth body panels
- Thread starter 69 beep beep
- Start date
Auto Metal Direct ?
YY1
Well-Known Member
I'm aware of two available patch panels for the wheel arch area.
One is poor, the other fair.
Not sure which is which.
AMD has nothing.
My brother used a patch cut from a clean 4 door and it came out GREAT!
One is poor, the other fair.
Not sure which is which.
AMD has nothing.
My brother used a patch cut from a clean 4 door and it came out GREAT!
robinsonwr
Well-Known Member
At this point a rust free donor or paqtch panels seem to be the only answer for 66-67 b-bodies.
Dako
Well-Known Member
Nobody makes full quarters for the `66 / `67...at least they didn't 2 years ago. I tried the 'lower half' quarter panel (can be found at JC WHitney, AMD, etc.) but ended up sending it back. It was much thinner gauge steel and was designed to fit 'multiple' cars (as in, with much massaging it 'could' fit a Belvedere I or II, Satellite, GTX, Coronet, etc.). Way more work than it was worth.
Used panels from Sherman (Canadian Co.) on my `66 Belvedere II. You can get them direct from the company or through Rock Auto (online parts store). They don't make 'everything', but they do make some. The body man was impressed with their gauge and fitment.
Used panels from Sherman (Canadian Co.) on my `66 Belvedere II. You can get them direct from the company or through Rock Auto (online parts store). They don't make 'everything', but they do make some. The body man was impressed with their gauge and fitment.
blazer 2010
Well-Known Member
I e mailed AMD and they said not at this time but I think everyone should bombard them with e mails looking for more parts for 67 gtx,s
Eddie Mopar
Well-Known Member
I went with Sherman and ***. back in 1991 with the lower repair panel sections. They were far from perfect. But when you are a begger and they were the only game in town, you've got to go with what was available.
Nobody is making full quarters, just as DAKO mentioned.
Nobody is making full quarters, just as DAKO mentioned.
69 beep beep
New Member
66-67 plymouth body panels
Yes,Auto Body Specialties in middlefield CT. Make the lowers in 3 piecies. Its close by so will have to go there soon & check quality. I Have a parts GTX hate to cut it up . Well lets not forget I guess alot of people are buying repo RR shells -I believe there was one at one of the shows last year . Thanks
Yes,Auto Body Specialties in middlefield CT. Make the lowers in 3 piecies. Its close by so will have to go there soon & check quality. I Have a parts GTX hate to cut it up . Well lets not forget I guess alot of people are buying repo RR shells -I believe there was one at one of the shows last year . Thanks
66_B_Body4ever
Well-Known Member
FYI here's the link to Sherman, I'm going to try the patch panel that I need for the right side...
http://www.shermanparts.com/ecat/ba...LYM&last1=BELV&make=PLYM&model=BELV&year=1966
http://www.shermanparts.com/ecat/ba...LYM&last1=BELV&make=PLYM&model=BELV&year=1966
Pugly
Well-Known Member
Cossuth and Sons has lots of salvage Mopars in the St. Louis area... Can't say they have exactly what you need but worth a shot.
blazer 2010
Well-Known Member
I,m sure they are the same parts as crosscanada parts
Attachments
66_B_Body4ever
Well-Known Member
Yes, you could be right. I have seen the patch panels from them years ago and they were no screamin hell... For us here in the Okanagan, McGraths Auto supply in Kelowna is a distributor...
Osyman
Well-Known Member
I got mine from yearone. I dont know who made them, but body guy didnt say he had any problems and i think it looks darn good
Similar threads
- Locked
