WTB 1963 Dodge 330 trim

Looking for a driver side rear quarter stainless trim for a '63 Dodge 330 2 door.
Alternately I could piece together what I have with that shorter piece from a 4 door car.
Jeff J

Jeffj said:

Looking for a driver side rear quarter stainless trim for a '63 Dodge 330 2 door.
Alternately I could piece together what I have with that shorter piece from a 4 door car.
Jeff J

Click to expand...

We have a 63 Polara 4dr car here, with all the stainless trim on it..but I'm not sure if
it is what you may need. I can send you pics through text, if need be. Just start a conversation
with us, to get your cell number. Dodge33

I think that a Polara has a wider trim, like about 1" at the front and flaring out to about 2 1/2" at the hockey stick on the quarter. The 330 is only about 1/2" to 3/4" front to back. It is a very narrow piece of stainless trim. You should be able to tell at a glance which it is. If it is correct, I'm on board and thanks for the reply. I'm not sure if I'm allowed to post my phone #?

Jeff, I am sure you are correct on the 63 Polara quarter panel trim. I walk past it a few times a week, but I guess I just never look at it much, but I'll look at it tomorrow, just to make sure! I was thinking about the trim earlier today, and happened to remember a 64 Dodge (either 440 or 330 series car) it was a 2dr from North Dakota, ( this happened before we purchased) some ya'hoo removed the rear door jams, from the car, using a torch and cut through the quarter panel, and stainless quarter trim!!!! When I get the chance, I will look at it, it may be fixable? If it is, the correct piece? Don't know if you would be interested, I just thought I would throw it out there? Dodge33