Gary Milton
Member
Does anyone know where I could find a rebuild kit for these calipers also, in need of one hub. I got all this stuff from a package deal and I'd like to put them on my roadrunner. Thanks guys!
Factory 4 piston bendix calipers
- Thread starter Gary Milton
- Start date
Yatzee
Well-Known Member
Do yourself a personal favor and locate a caliper rebuilder near you. They will dismantle, clean and inspect the unit and if still useable, hone, polish and rebuild them with the right seals. If the bores are good but the pistons crap, they can replace them. Cost is usually very low and you can be sure of their performance. Finding new seals requires skill as their sized by the thousands and the gap between the piston and the bore is critical.
I got a kit from Harmonclassic brakes.com for mine.
Need to send them out to be sleeved.
Joey D
Need to send them out to be sleeved.
Joey D
tribe_of_dan
Member
The Right Stuff Detailing has a rebuild service for these.
Gary Milton
Member
Great! Thank you for the help!
If you need, as you are putting your car together ---- I have -- BRAND NEW ---- Master Cylinder, Front Brake Hoses, Front ++ N.O.S. ++ Asbestos Brake Pads,
Front U.S.A. made Inner & Outer Bearings & Seals, and N.O.S. ++ Asbestos ++ Rear Brake Shoes for both 10" & 11".................. to treat your car right!!!!!!!!!
And ----- N.O.S. Front ROTORS and Rear Brake Drums...........
Front U.S.A. made Inner & Outer Bearings & Seals, and N.O.S. ++ Asbestos ++ Rear Brake Shoes for both 10" & 11".................. to treat your car right!!!!!!!!!
And ----- N.O.S. Front ROTORS and Rear Brake Drums...........
Similar threads
- Locked
- Locked
