Outlaw525
Well-Known Member
Forged, .030 over for 440 block, made by Icon. New in box w/pins and clips, I ended up needing .060. My loss. $599 new. Will sell for $400 plus shipping. Can do Paypal. PM if interested Thanks
From 440Source website:
These pistons are a 4.350" (.030 over) bore flat top piston which will work in a 440 block with 4.15" stroke and 6.76" rod "500CI" stroker combination. All our platinum pistons use 1/16, 1/16, 3/16 ring pack for less frictional loss, and weight saving, full floating .990 pin size. Our table below lists detailed compression ratios:
Bore Size: Dish (-) or Dome (+) CC's Compression Height: Distance Below Deck: 65CC 72CC 75CC 78CC 84CC 86CC 88CC P
Part#: 5093
Bore Size: 4.350 (.030 over)
Dish -4 (FT) CC's
Compression Height: 1.867"
Distance Below Deck: -.018"
Compression ratios:
65CC 13.09, 72CC 12.16, 75CC 11.80, 78CC 11.47, 84CC 10.85, 86CC 10.67, 88CC 10.48
From 440Source website:
These pistons are a 4.350" (.030 over) bore flat top piston which will work in a 440 block with 4.15" stroke and 6.76" rod "500CI" stroker combination. All our platinum pistons use 1/16, 1/16, 3/16 ring pack for less frictional loss, and weight saving, full floating .990 pin size. Our table below lists detailed compression ratios:
Bore Size: Dish (-) or Dome (+) CC's Compression Height: Distance Below Deck: 65CC 72CC 75CC 78CC 84CC 86CC 88CC P
Part#: 5093
Bore Size: 4.350 (.030 over)
Dish -4 (FT) CC's
Compression Height: 1.867"
Distance Below Deck: -.018"
Compression ratios:
65CC 13.09, 72CC 12.16, 75CC 11.80, 78CC 11.47, 84CC 10.85, 86CC 10.67, 88CC 10.48
