• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New kit with same front and rear friction plates

jogirob

jogirob

Well-Known Member
Local time
5:03 PM
Joined
Aug 16, 2018
Messages
247
Reaction score
87
Location
California
Last edited:
Did you check if that kit works for your 1974 model? Year to year can be different.
 
Yea I used the dropdowns to confirm aside from relying on the heading
Chrysler Torqueflite-6 A904 Rebuild Kit
1972-98 TF-6

1974 > Dodge > Special Edition Hard Top > Special Edition Hardtop 2-Door >
5.2L 318Cu. In. V8 GAS Naturally Aspirated



 
I took a micrometer to em and there actually is a very slight difference between em. Since they all had the same coloring, and they were all combined in a baggie made it seem like someone just grabbed 8 frictions and stuffed em in there. Under good light im now able to see there is a slight pattern to one set. All is well in the world!
 
By the way, what's your guys' take on Alto Green High Energy Friction plates? The ones I have look grey more than anything but mybe I'm going color blind. I went on the Alto website and don't see anything about no "green" friction plates. All the rave is around the reds and the basic ones being tan colored frictions.

The only similar results I got were from Allibaba (Chinese Ebay) for bulk sales of these grayish green looking plates. I'm wondering if it's something made up by the rebuild kit builders to make their kit seem more appealing?
 
Back in "the day"...the green waffle plates were the bomb, and IIRC using the reverse plates for the forward application provided a better % adhesion.
 
Forward frictions should be .083", rears .061"
Doug
 
You must log in or register to reply here.

Similar threads

C
  • Locked
SOLD Parting Out a 1979 Plymouth Arrow Race Car
Replies
0
Views
2K
Cody Crotty
C
Auto Transport Service
Back
Top