revel68
Active Member
Hi. We are having difficulties understanding the rear inside lower window trim. I have an image helping to illustrate whats going on.
We bought new trim and had the glass professionally installed and now we are not sure how to get this on.
From what we can tell it has a section that presses over the metal edge. But there is a load of glass glue goop in there - we were thinking we could cut it out but to get enough depth a lot would have to be cut out and fear it would be too much.
Also the trim seems to float above the package pretty high. (see gap in photo)
A lot of this stuff is funky and we are having trouble figuring it out. Any help on this is appreciated! Thanks!
We bought new trim and had the glass professionally installed and now we are not sure how to get this on.
From what we can tell it has a section that presses over the metal edge. But there is a load of glass glue goop in there - we were thinking we could cut it out but to get enough depth a lot would have to be cut out and fear it would be too much.
Also the trim seems to float above the package pretty high. (see gap in photo)
A lot of this stuff is funky and we are having trouble figuring it out. Any help on this is appreciated! Thanks!