• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 68-69 Coronet Roadrunner rear window lower rubber trim seal dam

Status
Not open for further replies.
I also needed the same part. I just purchased one from trimparts.com but it is on back order until at least the end of February. Hopefully it will be a decent looking part.
 
Thanks. It will be entirely plastic. The original lower trim piece should be a rubber seal. Their lower piece will not look original. Dynacorn has a correct rubber repo product for b-body 68-69 charger. It is 54.75 inches long X .75 x 1 inch. I measured the Coronet package tray. It is 56 inches long. Google Dynacorn and see this product. I called. You must purchase it from one of the dealers for approximately $28.00. Speak to them at their 800 # listed and get name of dealer nearest you. Examine the four pics of the product. Notice the correctness of the product. Too bad it’s too short in length. They don’t make our length. The product is made in Taiwan. Possibly purchase 2 and have a good interior guy mate them together. I may purchase the piece and experiment with it.
 
For 68-70 B-bodies at least, the piece is different between Dodge and Plymouth. I learned the hard way that it is supposed to be installed before the rear glass goes in.
 
hunt2elk said:
For 68-70 B-bodies at least, the piece is different between Dodge and Plymouth. I learned the hard way that it is supposed to be installed before the rear glass goes in.
Click to expand...
I am not sure all I know I saved one from a 1968 plymouth 2 door c
hunt2elk said:
For 68-70 B-bodies at least, the piece is different between Dodge and Plymouth. I learned the hard way that it is supposed to be installed before the rear glass goes in.
Click to expand...
I am sure I took one out of a 1968 plymouth 2 door roadrunner bob h 708 687 1187
 
Dominick Olivito said:
Hello Bob H.,
I have reached out to you via phone and email. No return response.
Call me please at 330-333-9148
Thanks
Dominick
Click to expand...
Check the last post in this thread. It’s my post and doesn’t garner a response I guess but if you can help me clarify what I have laid out on the table and how the 2 different bottom pieces fit in that space that would be great. I have at least one extra of the larger profile not shaped like an F I would sell.
https://www.forbbodiesonly.com/mopa...ear-glass-interior-lower-trim-problem.175024/
 
Just received my lower trim from trimparts and yes it is molded plastic, but fit is pretty good.
rear trim 1.jpg
rear trim 2.jpg
rear trim 3.jpg
 
Status
Not open for further replies.

Similar threads

M
  • Locked
FOUND 69 Roadrunner Interior black rear window trim
Replies
4
Views
663
3white74
3white74
Nomad613
  • Locked
WTB 68-70 Coronet Road Runner Lower Interior Rear Window Trim Mounting Bracket
Replies
3
Views
710
6pktgo
6pktgo
Huicho417
1967 Coronet rear window trim
Replies
4
Views
2K
YY1
YY1
69 hemibee
  • Locked
FOUND 69 Dodge rear window 1/2 curl trim
Replies
5
Views
597
69 hemibee
69 hemibee
6pktgo
  • Locked
SOLD 68 69 70 Charger Rear Window Lower SS Mldg
Replies
4
Views
688
6pktgo
6pktgo
Auto Transport Service
Back
Top