How to remove trim under front and rear window 72 charger

Kniify · Jun 3, 2025

Wondering whats the best way to remove trim underneath the front and back windows on my 72 charger. I got the nuts on the ends but is there any screws holding it in or is it just held in by clips? Would like to remove for easier painting and vinyl top install.

hanks73340 · Jun 3, 2025

Window Moulding Clip Remover

Kniify · Jun 3, 2025

hanks73340 said:
Window Moulding Clip Removeri

hanks73340 said:

Window Moulding Clip Remover
View attachment 1862724

Click to expand...

Its just clips underneath them nol screws?

T2R9 · Jun 3, 2025

Are you talking about the vinyl top trim? If so there nuts on the back side behind the sail panels and under the Dutchman in the trunk. Make sure you get them all then it will pop off the remaining plastic clips.

Kniify · Jun 3, 2025

T2R9 said:
Are you talking about the vinyl top trim? If so there nuts on the back side behind the sail panels and under the Dutchman in the trunk. Make sure you get them all then it will pop off the remaining plastic clips.

These pieces that are on the door panel and quarter panel I already have all the other trim pieces off the car

hanks73340 · Jun 3, 2025

Kniify said:
These pieces that are on the door panel and quarter panel I already have all the other trim pieces off the car

View attachment 1862741

View attachment 1862742

These are the Belt moldings. They are attached from inside the door and quarter window. Usually small screws.

T2R9 · Jun 3, 2025

Agree with Hank, screws are under the window sweeps. Pull the rubber glass stops to lower the glass far enough to access.

How to remove trim under front and rear window 72 charger

Kniify

Member

hanks73340

Well-Known Member

Kniify

Member

T2R9

FBBO Gold Member

Kniify

Member

hanks73340

Well-Known Member

T2R9

FBBO Gold Member

Similar threads