JDAVIS3611
Member
I am in the process of removing my 383 with air grabber hood. I am installing a 426 hemi does any one know where I can get a low profile air cleaner base for oval style for a single carb setup so it has the 2 bolt screw down.
426 hemi swap
- Thread starter JDAVIS3611
- Start date
chargervert
Well-Known Member
I have one that looks like it was a 383 one,but some one modified it to fit a 440 by raising the carb opening for an RB engine. I was going to run it on my N96 71 Charger R/T. I could sell it and buy the correct one for the car. I will take a couple pictures of it. My Hemi is almost ready to run on the dyno,I will be swapping it into my 440 70 Charger R/T.
chargervert
Well-Known Member
Probably going to end up using it on my car. The underside mods are pretty visible.
JDAVIS3611
Member
Let me know
not so famous bob
Well-Known Member
I`m jealous ...
- Local time
- 2:33 AM
- Joined
- Jan 16, 2011
- Messages
- 77,469
- Reaction score
- 124,076
- Location
- NorCal Sierras
Mancini Racing maybe,
their Airgrabber/Ramcharger reproduction air cleaner kits base & lids
depending on what height airfliter element you use,
if it's a gauze style (like a K&N) a 2" would be plenty of flow
an RB 440 one would have more drop to the base to it, for taller RB blocks
maybe go to their site & check the measurements
383 version is like $484 NOW, w/no filter,
I think the n96 style 70 fresh air 440 has like another 1" of drop, it's about the same price IIRC
their Airgrabber/Ramcharger reproduction air cleaner kits base & lids
depending on what height airfliter element you use,
if it's a gauze style (like a K&N) a 2" would be plenty of flow
an RB 440 one would have more drop to the base to it, for taller RB blocks
maybe go to their site & check the measurements
383 version is like $484 NOW, w/no filter,
I think the n96 style 70 fresh air 440 has like another 1" of drop, it's about the same price IIRC
Similar threads
- Locked
