6PKRTSE
Well-Known Member
I just cut the tip off of one of my screwdrivers and ground it into the shape of a clutch drive. I have been using it for almost 40 years on Holley carbs.
Holley carburetor vacuum secondary metering plate screws
- Thread starter Kern Dog
- Start date
I just rebuilt a spreadbore Holley with the same metering plates and used a phillips head screw driver to remove the screws. I have 2 differrent size clutch head drivers but they never fit. Just put a lot of pressure to prevent slipping.
1 Wild R/T
Well-Known Member
In 81 I got out of the Navy....Dad kept his tools away from me.... The Mac tool dealer & I got to be friends...
I know that scenario lol
- Local time
- 7:10 PM
- Joined
- Apr 13, 2012
- Messages
- 40,304
- Reaction score
- 144,564
- Location
- Granite Bay CA
I’m a bit late to update…
I did order a set of clutch screw sockets and they did arrive.
The one that fits was sprayed yellow for quick identification.
It fits snugly.
Score!
I did order a set of clutch screw sockets and they did arrive.
The one that fits was sprayed yellow for quick identification.
It fits snugly.
Score!
Hard to complain about that!
1 Wild R/T
Well-Known Member
Your years in construction are pretty apparent.... Spray paint makes IDing tools easy...
- Local time
- 7:10 PM
- Joined
- Jul 3, 2024
- Messages
- 839
- Reaction score
- 1,493
- Location
- Salinas, California
If I have a kit of tools and there is only one piece I need for a particular job and the rest usually just sit I do similar with masking tape.
Mainly because I don't want to wait for anything to dry.
Mainly because I don't want to wait for anything to dry.
- Local time
- 7:10 PM
- Joined
- Apr 13, 2012
- Messages
- 40,304
- Reaction score
- 144,564
- Location
- Granite Bay CA
Paint often eliminated the Hey, that is MY wrench conflict.
My stuff was usually a Petty Blue.
Here in the garage, I paint some specialty stuff a specific color. The 9/16” box end gets orange, 1/2” gets blue.
Maybe if my eyes were better I’d skip the short cuts.
My stuff was usually a Petty Blue.
Here in the garage, I paint some specialty stuff a specific color. The 9/16” box end gets orange, 1/2” gets blue.
Maybe if my eyes were better I’d skip the short cuts.
Similar threads
- Locked
