Search results for query: *

Be sure to get the roll pin and pivot clip that holds the CC cable to the carb throttle lever. Most forgotten part by folks stripping the CC stuff.

Cool. I was worried that I might have jerked those loose from somewhere that I wasn't familiar with, but it did occur to me that I might have an alternate harness in there too. Thanks!

I don't

notifications going wild on a 3 year old thread... :rofl:

I've touched base with a lot of people from school and old job and keep in touch with many of them. Also the FB marketplace is pretty good for selling stuff locally....

Ok guys, we have had a request by a guy who has lost touch with a member he was conversing with here a while back. He is trying to find a member here - real name 'Paul', who has a 1969 Plymouth GTX, is a machinist (or similar) and possibly lives on the eastern seaboard....as far inland as...

You most likely have a C-Body turn signal switch. The 3 wire connector is for cornering lights. If everything else works just tape them or tie them out of the way.

. Shines up pretty good for almost 25 year old paint

Are you sure? Are you adamant? :lol:

I pulled the column from my 71 roadrunner to install a steering box and rebuild the coupler, and discovered that I have some odd wires coming out of my column that I have not seen in my other 71s....... anybody know what these are for? The single yellow with a flat female connector and the 3...

This ^^^ , Or CC was popular on the 3rd Gen B bodies as well

1968-70 Plymouth Road Runner GTX Satellite Vinyl top trim. These are in excellent original condition with 3 original clips to install. They are not dented or sanded on. Stored for decades. $125pr plus shipping Parts are located in SE PA. Can send more pictures if interested. PM here on the...

What I was trying to get across was that it is possible to have a resistance in between the ground (chassis or battery terminal) and the other end of the ground wire where it attaches to the sender or tank etc. That resistance will add to the circuit current.

Painted the hood hinges for my new project.

I lost my dang mind today actually...list of chores performed: 1. Dragged wife out to garage and had her help me with attempting adjustments to ill-fitting windows in both doors of Fred; he has had a bad habit of the chrome end pieces not staying with the window edge itself as one struggles to...

I don't know about reversing the polarity - if it was a "Full or Empty" situation then you could switch the position of the needle with a relay. But now you're getting into tricky territory with a reversing of the adjusting resistance. If an in-tank fuel sender could be dismantled, it might...

Gotta love Mr. Norm I hate going to links on Fakebook though

Thanks for all the good comments! Transmission mount on the four-speed seems fine. This was the same shroud as the last radiator. It's about an 18 inch but need to measure again. It's the standard 7-blade with clutch on the big block Trac Pak car. I will check the 1/3 comment--was not familiar...

I have three or more cartons full of show trophies in my storage locker.....

Apocalypse Now is as much of a pseudo acid trip as it is a war movie.