Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can someone please show where the emergency brake bracket should be located on the floor pan?
looked at a bunch of diagrams and can't find the location of where it should welded.
This is for a 70 RR.
thanks, Joe
The floor wiring covers need to be welding in place before you install the floor pan, Correct?
Looks like the wiring cover tabs were welded under the floor pan when I removed it, but want to make sure.
Thanks, Joe
Hello, I put the new floor pan in my 70RR and already welded the 4 speed hump in place. I also mounted the 833 tailshaft with shifter to make sure everything lined up.
Everything lines up great and when i go under the car the to mark the pan to drill holes I see there's a gap between the front...
Both the lower door hinges on my 70 RR have cracks on the same place at the hinge spring hole (circled in each photo).
The hinges appear to be in good condition, can i just weld up the cracks after rebuilding them or should they be replaced?
thanks, J
Anyone have a set of these bolt inserts that fit a 70 RR the trunk lid bracket?
I can fabricate a pair but wanted to check if anyone has them available.
thanks, J
I have my beat up original grille and bezels, but considering going with one of these reproductions. Has anyone used either and vouch for quality/originality?
thanks, J
https://www.mopar9999.com/FCStore2008/shop/item.aspx?itemid=959...
I in the process of getting the metal work done on my 70 Roadrunner and trying to making sure panels line up before I make the permanent welds.
I need some pictures of the correct cowl to door and fender alignment.
What I have is low probably 1/16 or so and the door has to come up a bit (circled...
...gap is 3/8 inches. The rear quarter and cowl gaps look good, is there a trick to closing the gap for the rocker to door bottom? I can try moving up the weld loctions on the bottom inner rocker but wanted to check with you guys.
thanks!!!!
********************* close up **********************
I understand e-coat is a rustproof coat to protect bare metal, how to you guys treat the e-coat?
Scuff the e-coat and paint over or remove e-coat and then paint?
thanks, J
On a 70 RR, Located on the front left side, near where the firewall and frame rail meet.
I might have to cut it out, can't get a good hold on it and won't budge.
thanks, Joe
Has anyone installed the AMD torsion bar crossmember? Still debating on whether to change mine in a 70 RR. Any advice, suggestion or complaints?
http://www.autometaldirect.com/amd-torsion-bar-crossmember-66-70-dodge-plymouth-b-body-p-810.html
Are there are any pictures or video on the process of replacing a rocker panel?
I'm looking to replace both side and patching them would just be wrong.
thanks, J