Search results for query: *

Does that unit have a snap ring at the back of the piston ?

I saw that part number on Rock Auto I will order it. Thanks

That display picture for the master doesn't even show the bolt holes to hold the boot over the pushrod. Do you remember doing your install? Did it have the provision for the retainer and push rod boot? Did your push rod snap into place and stay locked in?

So the 69 A12 that I purchased was originally drum/drum. The previous owner installed a common front disc brake kit but continued to use the drum/drum master. I ordered a master from online tube that was listed as manual or power brake application. My concern is the piston does not have the...

I would run them and pay close attention to any shake or vibration. You will feel a shifted steel belt long before it fails.

This pertains to a 67 Coronet RT. I plan on taking it to Mecum Harrisburg to see if I can move it along. I’ve always believed it was a matching numbers drivetrain but the info on the engine tag and spd on the fender tag has me confused. Or I’m not decoding the spd correctly. I’ll post pictures...

Bob what units do you have date wise?

Something appropriate for a car built late may 69. That would be optimal but not an absolute.

Looking for a rebuildable 69 round back alternator core. Dan

The set I’m looking for would not have the oil fill cap. But thanks for replying

I’m replacing the long fuel and return lines on a 69 super bee. The pictured clip was part of the securing hardware kit. It appears to be for the return line, anyone know where it goes??

looking for a pair of 1969 original oe mopar bb valve covers that would just need a striping and repaint. Pitted, rusty and dented need not apply. thanks dan

Thank you Doug. That makes more sense than most of the instructions I have read. Only difference is Howard’s wants the measurements from .050 from each side of the base of the lobe as the both ramps are not symmetrical. My issue is I’m having an issue mounting the set up I own (thought I bought...

I have watched multiple videos on how to degree a cam with the heads on. All have different methods, at least for me I'm much more of a visual learner, unfortunately I find it difficult. I'll keep trying.

So I purchased a billet single bolt 9 keyway timing set for my 440. I wanted a quality billet set but didn’t want or need the nine crank slots. Just run the cam straight up. Purchased from 440 Source but turns out it’s a Summit private label part. So first thing I notice is the marks are not...

I can’t agree with your take on it Bob. I’m always fiddling with my cars and and doing subtle things to make things better in looks or performance. Usually when I complete a car to my standard or liking I move it along and look for that next project with whatever challenges it brings. My...

might you have an alternator with an april/may 69 date code?

msd is very sensitive to full battery voltage and a solid ground, both should come straight from the battery

i'm sure I can salvage what I need, really appreciate i Send me your paypal I'll shoot 50.00 dollars over to you to cover shipping and breakfast somewhere for you FYI I couldn't pm you your mail box needs to be emptied

I appreciate it but 440 source has new 1.5's in stock, 16 arms , 2 shafts, and springs for 275.00. I can't see overpaying for NOS crane. If I can't find a couple singles I'll just buy the 440 source setup.