Search results for query: *

Are your photos of VA products? The VA and CAA universal kits/component systems use in dash outlets to achieve a OEM look. Mike

Is the tension ring in place? A 11/32" socket works well to install both pieces. I use a nut driver. Mike

With enough amp, some big speakers might blast thru the seat back? Mike

Could you have mistakenly installed the pinion shaft seal with the lip facing out? Mike

Just get a used replacement and carry on. Mike

I would guess it was for production handling/painting. Mike

A picture is worth a thousand words! Mike

I concur. A lot of technology has passed/put into production since the purple grinds were developed. Mike

MM also built my 540 and recommended 20W-50. I am using Brad Penn. Mike

No commonly used pistons should make an engine run "crappy". Too much cam will. Mike

That is a simple style wheel. Repair it yourself, epoxy cracks, sand and paint it. Your local auto parts store should be able to mix the correct interior color and package it in a spray can. I did my 65 Coronet (first attempt) and it turned out fine. I went beyond and ordered a custom leather...

I used a Jegs model. Mike

Pics of my 65 heater: Mike

Is a 1965 the same? Mike

I have never heard of such a product-for home use? Poly engine? I had a 440 done in a machine shop-to correct bore alignment. Mike

I don't remember where I found him but, a fella modifies stockers to get the correct shape to mirror the left side. In fact he screwed up the first manifold he sent me and had to build another as the outlet clocking aimed into the block. I think it was from this site. Mike

I think I may have one. Mike

Transgo kits are designed for experienced transmission mechanics. Mike

Since the compressor reduces the volume of the gas it can be transported in a smaller line than the suction side. Did you forget Boyle's Law from school? Mike

High side is compressed gas/condensed liquid. Low side is suction after X-valve thru evaporator coil to compressor inlet. Do some research on this conversion, I removed the EPR valve from the compressor and added a thermostat to control the compressor clutch. It must be cycled to control...