Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think the nut torque is around 240 /ft lbs the rotational torque is about 23 inch /lbs for a new bearing 15 inch/lbs for a used bearing
Turning torque meter
Same with the 6 piston Challenger kit hoses are too short & you have to grind the spindle slightly to get the bracket in place they should supply with 18" hoses
Are the tail lights flickering at all I had a couple of switches fail on the hazard light circuit on the indicator plate, does it change if you put pressure on the hazard light switch
I am currently using Baer 6 piston pro with 13.5" rotors & 73 spindles using Forge line 18" ZX3 rims with a 4.5 Offset no problem 4 piston would be heaps the rear of the rim is parallel with no step all the way to the centre spokes
Yes , Great do you have a pic ,I have a ship address I go to the US every 4 months Mopar central 5637 w rim circle Riverside California 92509..
Do you have a price & payment I will pay to have them put in a tube
After blasting the trunk lid become extremely soft so i had to fill it with epoxy to stiffen it up which in turn made the lid very heavy in fact too heavy for the springs to hold the or even lift the lid from closed.
I milled up some hinge block's & fitted some rams now the lid open's smooth as...
What is the correct measurement for the circular road runner emblem on the trunk lid to the edge of the black circle seems to be a few different positions out there