Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On the Dougs site they list the 451 for B motors 1/34" tubes and 3" collectors. The 452's are 2" and 3.5" collectors.
The B blocks are shorter and narrower than an RB. Wonder if there is any difference other than pipe and collector dia?
Have a 727 that is leaking out of the servo shaft. Anybody have a part number for the o-rings that go on that shaft?
Here is a pic of the shaft I found here on FBBO.
Thank you!
I have the same problem. Once it's adjusted to go into park then trans wont go into low. It's a fine line to get it adjusted for park and low. Mine still isn't 100% yet.
I'd have to go with a 600 to get timing control correct? Not sure that the customer will upgrade to timing control down the road but it would be nice if the capability was there.
If not using the timing control a stock Mopar dist and ECU will work correct?
We will be installing a FiTech in a '70 Charger we are restoring at work. My plan was to go with a Tanks Inc EFI tank and pump.
Engine is a stock 383. Was thinking of using a Go EFI 4, and the Tanks Inc 255LPH pump. It's probably overkill but want to be able to upgrade for timing control and...
I have a question. Everybody says there 10.1 stroker will run on pump gas. What octane pump gas is everyone running? In my area 87 with 10% ethanol is the norm.
I know there was an article done a while back where they tested stock driveshaft and aluminum at the drag strip. Pretty sure it was Mopar Action, looked on the web but couldnt find it.
The difference as I remember was substantial.