Search results for query: *

$1000 per cylinder if you get caught running it in Australia something to do with the lead content

This is my Cold Case leaks between the filler neck & radiator tank contacted CC sent pictures when they found out I was in Australia they disappeared I will have to have the filler neck tig welded to the tank to stop the leak I have 3 x CC only one that leaks

Told the Vietnamese deli to ease up on the Chilli

Steak

Chrysler Perth WA

Has an beat up Challenger Valance & like the dual exhaust so I cut the part out & welded it into the standard Satellite valance

Could also have a wireless charger with batteries in the power board

Cousin in Tasmania glass blower latest creation Aurora Australis in a glass marble very talented

I think the nut torque is around 240 /ft lbs the rotational torque is about 23 inch /lbs for a new bearing 15 inch/lbs for a used bearing Turning torque meter

Same with the 6 piston Challenger kit hoses are too short & you have to grind the spindle slightly to get the bracket in place they should supply with 18" hoses

Confusing Vegans

8.5 " rear 8" front

Yes had 3 in a row where they are crimped at the rear is crimped off centre & the o'ring leaks i always used older original used 1 these days

Its happening a lot lately wrong & faulty parts being shipped i always try to buy made in the US parts even they are failing

Ebay Ok let me know soon as you list Thanks

Vegan

Headers or transmission touching body

.

Recent discovery shows how they built the pyramids

Are the tail lights flickering at all I had a couple of switches fail on the hazard light circuit on the indicator plate, does it change if you put pressure on the hazard light switch