Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I posted this in the wanted section but figured it might be worth checking here. Need a 66/67 Charger hood latch, don't care what it looks like just that it's functional.
Thanks,
Evan
********************
Please read the rules for posting ads BEFORE you post another ad, thanks.
I have the Sniper PDM so hooking the fan up was no problem. I also bought the Standard Motor Products TX3 CTS and it's supposed to be much more accurate than the Holley one.
This is what I used on my 66 link Not sure about mounting your shroud because I bought their shroud and fan combo. Think I had to drill a couple of mounting holes om one side. Scroll down for the 3 row.
Thanks to everybody that has responded. My ignition is stock at this time but hopefully I'll try the Hyperspark in the near future. In the meantime I'll see if the starter relay will work and if not do the switch jump. Thanks again, this forum is great!
I'm in the process of installing the Sniper 2 and it calls for a clean wire that is switched and is hot while cranking. The only ones I can find are off the ignition key and they are used for other things and I'm not seeing one from the fuse box. I have the stock fuse box, key and ignition...
For anybody that is considering doing this to their car I have found a source for the switches in case you can't find them. Link is there. Four switches shipped to Georgia was $52. I ordered them just now so haven't seen them but they are the same part number, Cherry 72-40AT but Cherry has sold...
Stupid question: you added the circuit breaker but on the sketch you only have one wire, which is the out side, I think. I'm assuming there is a hot wire in? If so where would it come from? Might try to get this out if I can find the switches. Thanks in advance.
Evan
I second the Retro Sound radios. I got the head unit, amp and big speakers to sit in the cargo area behind the rear buckets. Bought it and all the cables etc. from Crutchfield and had good customer service from them. I think they make a direct replacement for the radio you have.
LINK <This is the link for current instructions from Vintage Air for conversion of the non air controls to be repurposed to control the Vintage Air system.
This is off a 66. Lousy picture, sorry. The full shank is approx. 7/16" and the splines are approx. 1/4". I don't have a mic so the diameter of the top part (smooth part) is approx. 5/32" and the spline a little smaller. Let me know if I can help more.