Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Then, I would use the pal nuts (speed Nuts) that are listed above. They can be bought at any hardware store. Try to find some little rubber washers for a seal, or use the electricians putty to make a seal (it's non hardening). This is what I used .50" Wide Mastic Sealer Washers Seal Body Parts...
RTR stands for ready to run. How is the block grounded to the chassis? You mentioned the distributor grounded to the block. Also, Ohm out the coil as suggested before.
small blocks also used the 130 tooth flywheel, the 383 and 440 had six bolt cranks and the Hemi was an eight bolt flange. 1970 was when the big blocks switched over to the 10.5" 130 tooth flywheel. I don't believe the 440 came with an eight bolt flange. The 130 tooth off a small block will fit a...
Welcome! My V-code came from the Culpepper area. I wonder if you can help with some history? It's a 70 Super Bee Sublime green car with a black painted roof. I also have some pictures of it from back in the 70's from the second owner Randall Shruggs. There is some history there I know it. Also...